Sharp VL-WD650U VLWD450U|VLWD650U Operation Manual - Page 89
Card Recording
![]() |
View all Sharp VL-WD650U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Card Recording It is possible to take a still picture in the same way as you do with a standard camera and record that image on the SmartMedia card. Media Selection switch 6 Adjust the Power Zoom control to frame the subject as you desire. 7 Press the STILL button to begin recording. • The S indicator flashes red while data is being recorded on the SmartMedia card, and returns to white when recording completes. STILL button Power Zoom control AUTO CARD 10 90 Power switch 1 Insert a SmartMedia card into the camcorder. 2 Remove the lens cap, and lift up the viewfinder. 3 Set the Media Selection switch to CARD. Notes: • Recording under insufficient lighting may result in blurred images. It is recommended that you use a tripod to record insufficiently illuminated subjects. • Recording under the light of a fluorescent, mercury, or sodium lamp may cause flickering in the image and, depending on the timing of the shot, may result in changes to color hue in the image. Caution: • Do not turn the power off while the S indicator is flashing in step 6. 4 Hold down the Lock button and set the Power switch to CAMERA. • The picture from the lens is now displayed in the viewfinder. Number of shots taken 10 90 Number of shots remaining Lock button 5 Perform steps in "Selecting a still recording effect" to select the desired still recording effect (see page 40). 74 SmartMedia Card Features
![](/manual_guide/products/sharp-vlwd450u-vlwd450uvlwd650u-operation-manual-3ed23ba/89.png)