Sharp XG-C335X XG-C330X , XG-C335X , XG-C430X Operation Manual - Page 69
Specifications - xg c330x projector manual
UPC - 074000365209
View all Sharp XG-C335X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Specifications Product type LCD Projector Model XG-C430X/XG-C335X/XG-C330X Video system NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/ DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I Display method LCD panel × 3, RGB optical shutter method LCD panel Panel size: 0.8" No. of dots: 786,432 dots (1,024 [H] × 768 [V]) Lens 1.2 × zoom lens, F1.7-1.9, f = 28.0-33.6 mm Projection lamp 275 W AC lamp Component input 15-pin mini D-sub connector (COMPUTER/COMPONENT 1, 2)/ Y: 1.0 Vp-p, sync negative, 75 Ω terminated output (MONITOR OUT) signal PB: 0.7 Vp-p, 75 Ω terminated PR: 0.7 Vp-p, 75 Ω terminated Horizontal resolution 700 TV lines (DTV720P) Computer RGB input 15-pin mini D-sub connector (COMPUTER/COMPONENT 1, 2)/ RGB separate/sync on green type analog input: 0-0.7 Vp-p, positive, 75 Ω terminated output (MONITOR OUT) signal HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) VERTICAL SYNC. SIGNAL: Same as above RGB digital input signal (DVI-D) DVI connector (24-pin), RGB (digital), 250 -1,000 mV, 50 Ω (Compatible with HDCP) Video input signal RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω terminated S-video input signal 4-pin mini DIN connector Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Audio input signal ø3.5 mm minijack, RCA terminal 0.5 Vrms, more than 22 kΩ (stereo) Audio output signal ø3.5 mm minijack 0.5 Vrms, less than 2.2 kΩ (stereo) USB terminal 4-pin B-type USB female connector RS-232C terminal 9-pin mini DIN connector LAN terminal 8-pin RJ-45 modular connector Pixel clock 12-108 MHz Vertical frequency 43-85 Hz Horizontal frequency 15-70 kHz Audio output 2.0 W (monaural) Speaker system 3.6 cm round × 1 Rated voltage AC 100-240 V Input current 3.6 A Rated frequency 50/60 Hz Power consumption 360 W (Eco/Quiet Mode "Off")/300 W (Eco/Quiet Mode "On") with AC 100 V 345 W (Eco/Quiet Mode "Off")/285 W (Eco/Quiet Mode "On") with AC 240 V Power consumption (standby) 6 W (AC 100 V) - 8 W (AC 240 V) (LAN/RS232C Disable) Heat dissipation 1,350 BTU/hour (Eco/Quiet Mode "Off")/1,125 BTU/hour (Eco/Quiet Mode "On") with AC 100 V 1,295 BTU/hour (Eco/Quiet Mode "Off")/1,070 BTU/hour (Eco/Quiet Mode "On") with AC 240 V Operating temperature 41°F to 95°F (+5°C to +35°C) Storage temperature -4°F to 140°F (-20°C to +60°C) Cabinet Plastic I/R carrier frequency 38 kHz Dimensions (approx.) 12 27/32" × 4" × 11 1/64" (326 (W) × 101.5 (H) × 279.5 (D) mm) (main body only) 12 15/16" × 4 63/64" × 11 1/2" (328.5 (W) × 126.5 (H) × 292 (D) mm) (including adjustment foot and projecting parts) Weight (approx.) 10.8 lbs. (4.9 kg) Replacement parts Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K., Power cord for U.K., Hong Kong and Singapore, Power cord for Australia, New Zealand and Oceania, RGB cable, DIN-D-Sub RS-232C adaptor, Storage case, Lens cap, Lens cap strap, Projector manual and technical reference CD-ROM, Operation manual As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. -67 Appendix