Sharp XL MP130 XL-MP130 Operation Manual - Page 36

Advanced Features SPEAKERS XL-MP130 Enhancing your system The connection cord is not included. Purchase a commercially available cord as shown below. VCR, DVD, etc. ANTENNA AM FM 75 OHMS GND LOOP VIDEO/AUX IN RIGHT LEFT White To the line output jacks Red Red WhiteRATED SPEAKER IMPEDANCE: 6 OHMS MIN. AC INPUT RIGHT LEFT RCA cord SUBWOOFER PRE-OUT (not supplied) Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection cord to connect the VCR, DVD, etc. to the VIDEO/AUX IN jacks. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on. 3 Press the VIDEO/AUX button. 4 Play the connected equipment. Note: To prevent noise interference, place the unit away from the television. To record on a tape 1 Insert a cassette in the cassette compartment. 2 Press the VIDEO/AUX button. 3 Press the button. 4 Press the / ( ) button. 5 Play the VCR, DVD, etc. Auto power on function: When you press any of the following buttons, the unit turns on. VIDEO/AUX button (main unit and remote control): The unit turns on and the "VIDEO" function is activated. / button on the main unit: The unit turns on and playback of the last function starts (CD,TAPE,TUNER,VIDEO/AUX). 36 Headphones Before plugging in or unplugging the headphones, reduce the volume. Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms. Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control.