Sharp XV-Z10000U XV-Z10000 Operation Manual
Sharp XV-Z10000U - SharpVision - DLP Projector Manual
 |
UPC - 074000358836
View all Sharp XV-Z10000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XV-Z10000U manual content summary:
- Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 1
PROJECTOR PROJECTEUR PROYECTOR PROJETOR XV-Z10000 OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAÇÃO ENGLISH 1 - -XX FRANÇAIS 1 - -XX ESPAÑOL 1 - -XX PORTUGUÊS ...... -1 - -XX - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 2
Model No.: XV-Z10000 Serial No.: There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor warranty - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 3
and used in accordance with the operation manual, may cause harmful interference to radio Conformity SHARP PROJECTOR, MODEL XV-Z10000 This device complies with Part 15 of the FCC rules. Operation .eiae.org . Caution Concerning the Lamp Replacement See "Replacing the Lamp" on page 76. WARNING: Some - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 4
DLP™ projectors. • Superior image quality with Minolta™ optical lens system. • Use of 270 W high-output lamp of slanted lines, even signals not reaching a panel resolution of 480I/P can be projected by converting to supports the building of home theaters using HTPC*. * Abbreviation for Home Theater - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 5
Operation Manuals of SharpVision Manager 9 Part Names 10 Projector (Front and Top View 10 Projector (Rear View 11 Part Names 12 Remote Control (Front View 12 Remote Control (Top View 12 Using the Remote Control 13 Available Range of the Remote Mode 61 Operating the Theater Mode Function 61 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 6
the Lamp 76 Lamp 76 Caution Concerning the Lamp 76 Replacing the Lamp 76 Removing and Installing the Lamp Unit 77 Resetting the Lamp remote control input 83 Function and transmisson codes 83 Sharp remote control signal format 83 Computer Compatibility Chart 84 Troubleshooting 85 For SHARP - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 7
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 8
to restore the product to normal operation. e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinct change in performance. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 9
your nearest Authorized SharpVision Service Center or Dealer for replacement. See "Replacing the Lamp" on page 76. CAUTION PRECAUCIÓN PRÉCAUTION BQC-XVZ100001 Cautions concerning the setup of the projector I For minimal servicing and to maintain high image qual- ity, SHARP recommends that this - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 10
Operation Manuals of SharpVision Manager PDF operation manuals for the "SharpVision Manager" theater projector software provided are included in the CD-ROM in several languages. To utilize these manuals click the installation program and follow the instructions on the screen. For Macintosh: 1 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 11
blue, indicating normal function. Replace the lamp when the indicator illuminates red. 32 Power indicator Illuminates red, when the projector is in standby. When the power is turned on, this indicator will illuminate blue. 73 Intake vent 25 Adjustment foot 13 Remote control sensor 61 HIGH CONTRAST - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 12
connector Exhaust vent 73 73 Intake vent Remote control 13 sensor Using the Kensington Lock This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 13
, etc.) 47 PICTURE SETTING button For selecting the picture memory setting. Backlight button For lighting each button, press this button. Remote Control (Top View) Remote control signal transmitters 13 -12 24 WIRED R/C JACK For controlling the projector by connecting the remote control to the - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 14
remote control may malfunction under a fluorescent lamp. Under that circumstance, move the projector away from the fluorescent lamp. 45˚ 30˚ Remote The batteries included with this projector may exhaust over a short period, depending on how they are kept. Be sure to replace them as soon as possible - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 15
Supplied accessories Remote control RRMCGA128WJSA Two "AA" size batteries Power cord CACCDA010DE01 Lens cap (attached) PCAPH01056CESA CD-ROM (SharpVision Manager) UDSKAA019WJZZ Terminal cover CCOVA1985CE02 Operation manual (this manual) TINS-A440WJZZ SharpVision Manager operation manual TINS - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 16
Connections and Setup Connections and Setup - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 17
it is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: Video equipment: I A VCR, Laser disc player or other video equipment (See page 17.) I A DVD - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 18
to realize a higher-quality image. To view a higher-quality image, use a commercially available S-video cable to connect the INPUT 3 terminal on the projector and the S-video output terminal on the video equipment. To S-video output terminal To video output terminal VCR or other video equipment - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 19
" menu, or select the RGB mode by pressing on the remote control. See page 64. • The (HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. -18 To analog RGB - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 20
15-pin D-sub adaptor (sold separately) *DTV is the umbrella term used to describe the new digital television system in the United States. Connect the projector to the video equipment using a 3 RCA to 15-pin D-Sub cable using the DVI to 15-pin D-Sub adaptor. Note • The component jack for a DVD - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 21
accessory *DTV is the umbrella term used to describe the new digital television system in the United States. DVI cable (sold separately) Connect the projector to the video equipment using the DVI cable. Note • Select the input signal type of the video equipment. See page 64. DVI cable Type - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 22
the projector. Use Authorized SharpVision Service Center or Dealer. • Depending on the computer you are us- ing, an image may not be projected un- less the signal output setting of the com- puter is switched to the external output. Refer to the computer operation manual - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 23
, allowing for quick and easy setup. I Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA DDC compatible computer. -22 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 24
projector to the computer using an RS-232C cable. Note • Do not connect or disconnect an RS-232C cable to or from the computer while it is on. This may damage your computer. • The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 25
as a Wired Remote Control Connecting the Remote Control to the Projector When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNW4870CEZZ) from - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 26
or when the screen is slanted. The projection of the image can be made higher by adjusting the projector when it is in a location lower than the screen. 1 Press the foot releases and lift the projector to the desired angle. 2 Remove your hands from the foot releases. Once the adjustment feet have - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 27
Setup Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. 1 Zooming is adjusted by mov- ing the zoom knob. 2 The focus is adjusted by rotat- ing the focus ring. Focus ring Zoom knob Zoom in - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 28
of the lens by rotating the lens shift dial on the top of the projector. Note • Do not forcibly turn the lens shift dial be- yond the range of the upper limit and lower limit positions. This may cause the projector to malfunction. Selecting the HIGH CONTRAST/ HIGH BRIGHTNESS MODE Pressing the HIGH - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 29
and dim the lights when setting up the screen in a sunny or bright room. • A polarizing screen cannot be used with this projector. Standard Setup (Front Projection) I Place the projector at the required distance from the screen according to the desired picture size. (See page 29.) Side View 90° Top - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 30
Setup Screen Size and Projection Distance x yz Connections and Setup When using a normal screen (4:3) In case of setting the 16:9 picture to the full horizontal width of the 4:3 screen. 4 3 : Screen area : Picture area Screen size (4:3) Projection Distance (y) Diag. (x) 250" 200" 150" 100" 84" - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 31
of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling-mount bracket (sold separately - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 32
Basic Operation Basic Operation - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 33
illuminates red, and the projector enters standby mode. 2 Press on the remote control or on the projector. • The power indicator illuminates blue. After the lamp replacement indicator illuminates, the projector is ready to start operation. Lamp replacement indicator ", ',\, | buttons ENTER button - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 34
remote control or on the projector to select the INPUT mode. • After pressing once on the projector, use to select the desired input mode. Note • When no signal is received, "NO SIGNAL" will be displayed. When a signal that the projector selected "Analog RGB". ➝ ➝ ➝ ➝ ➝ Basic Operation -33 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 35
displayed, to turn off the projector. Power (OFF) button ENTER button Note • If you accidentally pressed and do not want to turn off the power, wait until the confirmation message disappears. Info • Do not unplug the power cord during projection or cooling fan operation. This can cause damage due - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 36
Basic Operation 3 Press ' or " to select the de- sired language, and then press . 4 Press . • The desired language will be set as the on-screen display. -35 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 37
Keystone Correction and Vertical Size Adjustment Correcting Trapezoidal Distortion and Adjusting the Vertical Size of the Picture This function allows for Keystone (On-screen Trapezoidal Distortion) Correction and the adjustment of the vertical size of the picture. KEYSTONE button ENTER button - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 38
length of the image. Press to reset the image. UNDO button Pressing " decreases the vertical length of the image. Press to reset the image. Basic Operation -37 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 39
projector. I INPUT 1 / 2 / 5 Mode Main menu Picture Page 44 Sub menu Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp XX +XX Reset DNR Lamp Timer OSD Display * Signal Type Background and "A. Comp.". Note • The resolution, vertical frequency and horizontal frequency figures - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 40
Operation I INPUT 3 / 4 Mode Main menu Picture Page 44 Gamma Page 48 C.M.S. Page 50 Sub menu Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp menu Digital Shift -30 +30 Subtitle -30 +30 Reset DNR Lamp Timer OSD Display Video System Background Economy Mode RS-232C PRJ Mode - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 41
has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu screen for INPUT 1, INPUT 2 or INPUT 5 RGB mode Menu screen for INPUT 3, INPUT 4 or INPUT 5 VIDEO - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 42
Basic Operation 2 Press \ or | to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages 38 and 39. 3 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 43
Using the Menu Screen Menu Selections (Settings) 1 Press . • The menu screen is displayed. Note • The "Picture" menu screen for the selected input mode is displayed. • The on-screen displays shown on the lower right is displayed when INPUT 1, 2 or INPUT 5 RGB mode is selected. 2 Press \ or | to - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 44
"OK" and then press . • Use to select "ON" or "OFF" for the item of "Eonomy Mode". 7 Press . • The menu will disappear. Sub menu -43 Basic Operation - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 45
. See page 47 for details. Adjust the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Description \ button | button Contrast Bright Color Tint Sharp CLR Temp For adjusting the contrast level For less contrast For more contrast For - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 46
the Gamma Position This function allows you to select the desired gamma position. Select "Gamma Position" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. ➝For setting the gamma, see page 48. Selecting the C.M.S. Color This function allows you to select - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 47
"Progressive Mode" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • 2D Progressive This video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 48
" for each adjustment value in memory before setting on the "Picture" menu. Select "Picture Setting" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Description Memory 1 to Memory 5 Settings of all items in "Picture" can be stored for - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 49
the gamma curve for each of RGB. Allows you to adjust gamma value using SharpVision Manager Software. Note • The gamma position you make the setting in this SVM Gamma", refer to the SharpVison Manager operation manual (supplied). Standard Black Detail Brighten SVM Gamma Custom 2 Custom 1 -48 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 50
gamma curve to suit your preferences. Select the gamma item in the "Gamma" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • These gamma values can be adjusted only when the gamma less brightness in blue color For more brightness in blue color Basic Operation -49 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 51
Selecting the Color Reproduction Mode Select "Color Selected" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Standard Custom 1-3 Description Sharp default setting "Lightness", "Chroma" and "Hue" can be adjusted for each of the six colors - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 52
menu screen, see pages 40 to 43. Setting the Chromatic Value of the Target Color Select "Chroma" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Setting the Hue of the Target Color Select "Hue" in the "C.M.S." menu on the menu screen. ➝For - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 53
(C.M.S.) Resetting User-Defined Color Settings Select "Reset (This Color)" or "Reset (All Colors)" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Reset (This Color) Reset (All Colors) Description "Lightness", "Chroma" and "Hue" of - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 54
"VPos" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Clock Phase H-Pos easily by pressing . See page 55 for details. Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 55
Adjustment Settings Adjustment settings stored in the projector can be easily accessed. Select "Select Setting" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • If a memory position has not been set, a resolution and frequency setting will not be - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 56
on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note When setting to " Normal" or " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 57
Function Used to set the screen displayed during Auto Sync. Select "Auto Sync Disp" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Description The image set as a background image is projected. The computer image being adjusted is - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 58
Easy to Use Functions Easy to Use Functions - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 59
is pressed, the display changes as shown on pages 59 and 60. Info • In the Dot by Dot Mode, images are displayed in the original resolution, therefore they will not be enlarged. • To return to the standard image, press while "RESIZE" is displayed on the screen. RESIZE button Screen display of - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 60
VIDEO For 4:3 aspect ratio For 16:9 aspect ratio 480I 480P 576I 576P NTSC PAL SECAM 480P 720P 1080I SIDE BAR SMART STRETCH CINEMA ZOOM STRETCH DOT BY DOT 960 ן720 1280 ן720 1280 ן720 1280 ן720 - 960 ן720 - - 1280 ן720 - - 1280 ן720 - - 1280 ן720 1280 ן720 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 61
COMPUTER For 4:3 aspect ratio For without 4:3 aspect ratio SVGA (800 ן600) XGA (1024 ן768) SXGA (1280 ן960) SXGA (1280 ן1024) NORMAL 960 ן720 960 ן720 960 ן720 900 ן720 • "NORMAL" is fixed when XGA (1024 × 768) signals are entered. Input Signal Output screen image - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 62
projected light and the contrast of the image. It can be operated using the HIGH CONTRAST/HIGH BRIGHTNESS MODE button on the projector. Set "NORMAL" when the projector is used in a relatively bright room. Operating the Theater Mode Function Press the HIGH CONTRAST/HIGH BRIGHTNESS MODE button to - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 63
Select "Digital Shift" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • The Digital Shift Display Select "Subtitle" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • When changing the screen with - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 64
Off the On-screen Display Select "OSD Display" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Normal Level A Level B Description All On-screen , and warning displays (Power off/Temp./Change The Lamp., etc.)) -63 Easy to Use Functions - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 65
Video RGB, Digital Video Component, Analog RGB or Analog Component for INPUT 5. Select "Signal Type" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note For INPUT 1 and INPUT 2 RGB Set when RGB signals are received from video equipment. Set when - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 66
signal difference. In that case, switch the video signal. Setting the Video System Select "Video System" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • The video signal can only be set in IN- PUT 3 or INPUT 4 mode. • In "Auto", images - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 67
This function allows you to select the image displayed when no signal is being sent to the projector. Selecting a Background Image Select "Background" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Blue None Blue screen Black screen - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 68
the projector. Setting the Power Save Select "Power Save" in "Economy Mode" under the "Options" menu on the menu screen. ➝For operating the OFF". RS-232C does not operate when the power supply is in standby. Note • Set "RS-232 Port" to "ON" when using the SharpVision Manager Software. • "RS-232S - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 69
) Select "RS-232C" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the computer's baud rate. -68 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 70
/Inverting Projected Images This projector is equipped with a reverse/invert image function that allows you to reverse or invert the projected image for various applications. Setting the Projection Mode Select "PRJ Mode" in the "Options" menu on the menu screen. ➝For operating the menu screen, see - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 71
Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the "Status" menu on the menu screen and press . ➝For operating the menu screen, see pages 40 to 43. -70 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 72
Appendix Appendix - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 73
the power cord before clean- ing the projector. I The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the finish on the cabinet. I Do not use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 74
with ventilative holes to ensure the optimal operating condition of the projector. • Periodically clean the ventilative hole by be cleaned every 100 hours of use. Clean the ventilative holes more often when the projector is used in a dirty or smoky location. Cleaning the Ventilative Holes 1 Turn off - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 75
does Power off not illuminate. • Burnt-out lamp • Lamp circuit failure • Carefully replace the lamp. (See page 77) • Take the projector to your nearest Authorized SharpVision Service Center or Dealer for repair. • Please exercise care when replacing the lamp. Power Blue on/ indicator Red on Red - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 76
again, as during a brief test, the lamp replacement indicator may be triggered, preventing the power from going on. Should this occur, take the power cord out of the wall outlet and plug it back in again. • If you want to clean the air vents during projector operation, be sure to first press . Make - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 77
, it is recommended you contact your nearest Authorized SharpVision Service Center or Dealer to remove the damaged lamp and assure safe operation. Replacing the Lamp Caution • Do not remove the lamp unit immediately after operation of the projector. The lamp will be hot and touching it can lead to - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 78
the steps below. • Do not loosen other screws except for the lamp unit cover and lamp unit. (Only the silver screws are loosened). • Please refer to the installation manual included with the lamp unit. 1 Press on the projector or on the remote control to turn off the power. • Wait until the cooling - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 79
the side of the projector. Then tighten the user service screw. Info • If the lamp unit and lamp cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. 1 Connect the - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 80
Connecting Pin Assignments DVI-I (INPUT 5 / DIGITAL INPUT) port : 29 pin connector C3 24 23 18 17 C5 C4 C2 C1 8 7 ~ 2 1 16 ~ 9 • DVI Digital INPUT Pin No. Signal Pin No. 1 T.M.D.S data 2- 16 2 T.M.D.S data 2+ 17 3 T.M.D.S data 2 shield 18 4 Not connected 19 5 Not connected 20 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 81
code (0DH) Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Return code (0DH) When using the computer control function of the projector, the projector's operating status cannot be read by the computer. Therefore - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 82
(RS-232C) Specifications and Command Settings BUTTONS & REMOTE CONTROL KEY CONTROL CONTENTS COMMAND PARAMETER RETURN POWER ON P OR ERR INPUT 4 (VIDEO) TINT (-30 - +30) V A T I * * * * OK OR ERR INPUT 4 (VIDEO) SHARP (-30 - +30) V A S H _ * * * OK OR ERR INPUT 4 CLR TEMP (55 - 115) V A C - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 83
M B G _ _ _ 2 OK OR ERR AUTO POWER OFF : NO USE A P O W _ _ _ 0 OK OR ERR AUTO POWER OFF : USE A P O W _ _ _ 1 OK OR ERR LAMP USAGE TIME T L T T _ _ _ 1 0-9999 (INTEGER) PROJECTION MODE : FRONT I M P J _ _ _ 0 OK OR ERR PROJECTION MODE : CEILING + FRONT I M P J _ _ _ 1 OK OR ERR PROJECTION - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 84
are fixed at "10110". • Codes C14 and C15 are reverse confirmation bits, with "10" indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format D D D D D D D D D D D D D 67.5 ms 67.5 ms Wave form of output signal: Output using - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 85
to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WS Resolution Horizontal Frequency (kHz) to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 86
Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to rear panel of the projector. • - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 87
to 30 seconds or more. Page 64 74 44 80 For SHARP Assistance (U.S.A only) If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on this page. If this operation manual does not answer your question, please call toll free 1-877-DTV - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 88
(11'10", 3.6 m), Terminal cover, Lens cap (attached), SharpVision Manager Software CD-ROM, Projector operation manual, SharpVision Manager operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ100001), Remote control (RRMCGA128WJSA), AA size batteries , Power cord (CACCDA010DE01 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 89
Dimensions Units: inches (mm) Side View Rear View Top View Side View 15 49/50 (406) 7 (178) Front View Bottom View 18 11/16 (475) -88 - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 90
High quality resizing of lower and higher resolution images to fit the projector's native resolution. Aspect Ratio Width and height ratio of signals. Dot by dot Mode that projects images in their native resolution. Gamma Image quality enhancement function that offers a richer image by brightening - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 91
Lamp Life 76 Lamp replacement indicator 32 Lens cap 10 Lightness 51 MENU button 32 NORMAL 58 Optional accessories 14 OSD Display 63 PDF 9 Phase 53 Power buttons 32 Power cord 16 Power indicator 32 PRJ mode 69 Progressive Mode 46 Remote control 12 Remote control sensor 13 Replacing - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 92
Coverage (if any): Where to Obtain Service: What to do to Obtain Service: XV-Z10000 Projector (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from date of purchase except for the Projector Lamp for which the warranty period is ninety - Sharp XV-Z10000U | XV-Z10000 Operation Manual - Page 93
fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an Authorized Sharp Servicing Dealer. In home warranty service may be
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
 |
 |
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV
-
Z10000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH
.............
-1 –
-XX
FRANÇAIS
...........
-1 –
-XX
ESPAÑOL
............
-1 –
-XX
PORTUGUÊS
......
-1 –
-XX