Sharp XV-Z3100 Operation Manual

Sharp XV-Z3100 - DLP Projector - HD 720p Manual

Get Sharp XV-Z3100 - DLP Projector - HD 720p PDF manuals and user guides
UPC - 074000365162
View all Sharp XV-Z3100 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XV-Z3100 manual content summary:

  • Sharp XV-Z3100 | Operation Manual - Page 1
    PROJECTOR PROJEKTOR PROJECTEUR PROJEKTOR PROYECTOR PROIETTORE PROJECTOR XV-Z3100 OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI BRUKSANVISNING MANUAL DE MANEJO MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING ITALIANO NEDERLANDS ESPAÑOL SVENSKA FRANÇAIS DEUTSCH ENGLISH
  • Sharp XV-Z3100 | Operation Manual - Page 2
    USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST red. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
  • Sharp XV-Z3100 | Operation Manual - Page 3
    located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 10. Model No.: XV-Z3100 Serial No.: WARNING: High brightness light
  • Sharp XV-Z3100 | Operation Manual - Page 4
    projector enters standby mode. During normal operation, when putting the projector into standby mode always use the STANDBY/ON button on the projector or the STANDBY button on the remote Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 56. This SHARP projector uses a DLP® chip.
  • Sharp XV-Z3100 | Operation Manual - Page 5
    In this operation manual, the illustration and icons Picture Picture Mode Contrast Bright Color Tint Sharp Red Blue INPUT 1 Standard 0 0 projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 51 Troubleshooting
  • Sharp XV-Z3100 | Operation Manual - Page 6
    Manual .... 3 Contents 4 IMPORTANT SAFEGUARDS 6 Accessories 10 Part Names and Functions 11 Inserting the Batteries 14 Usable Range 15 Quick Start Quick Start 16 Setup Setting up the Projector 18 Setting up the Projector 18 Standard Setup (Front Projection) ....... 18 Ceiling-mount
  • Sharp XV-Z3100 | Operation Manual - Page 7
    the Lamp 56 Lamp 56 Caution Concerning the Lamp 56 Replacing the Lamp 56 Removing and Installing the Lamp Unit 57 Resetting the Lamp Timer 58 Connecting Pin Assignments 59 RS-232C Specifications and Command Settings 60 Computer Compatibility Chart 61 Troubleshooting 62 Specifications
  • Sharp XV-Z3100 | Operation Manual - Page 8
    servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory
  • Sharp XV-Z3100 | Operation Manual - Page 9
    way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original
  • Sharp XV-Z3100 | Operation Manual - Page 10
    lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 56. Caution concerning the setup of the projector I For minimal servicing screen washes out the colors, making viewing difficult. Close
  • Sharp XV-Z3100 | Operation Manual - Page 11
    the AC outlet and turning off the equipment to be connected. I Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries I The power supply voltage and the shape of the plug may vary
  • Sharp XV-Z3100 | Operation Manual - Page 12
    I Lamp unit I DIN-D-sub RS-232C adaptor (5 57/64o (15 cm)) I 3 RCA to 15-pin D-sub cable (10' (3.0 m)) AN-XR10L2 AN-A1RS AN-C3CP2 Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XV-Z3100 | Operation Manual - Page 13
    manual where the topic is explained. Projector Top View Power indicator 28, 54 28, 54 Lamp indicator STANDBY/ON 28 button For turning the power on and putting the projector For enlarging/ reducing the picture. 15 Remote control sensor (front) Push both sides of the lens cap to attach or remove.
  • Sharp XV-Z3100 | Operation Manual - Page 14
    manual where the topic is explained. Rear View 51 Exhaust vent Intake vent 51 AC socket 28 Connect the supplied Power cord. Rear adjustment 31 foot Terminals 15 Remote Connecting the computer to control the projector. TRIGGER terminal 7 When the projector is turned on, a control signal
  • Sharp XV-Z3100 | Operation Manual - Page 15
    "MEDIUM MODE" and "HIGH CONTRAST MODE". Using the Kensington Lock on the projector • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the
  • Sharp XV-Z3100 | Operation Manual - Page 16
    wipe them first and then remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you will not be using the
  • Sharp XV-Z3100 | Operation Manual - Page 17
    distance of the signal may differ depending on the screen material. When using the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent
  • Sharp XV-Z3100 | Operation Manual - Page 18
    equipment and plug the power cord into the AC socket of the projector _PP. 22-28 To INPUT 4 terminal AC socket Connect the audio output of any video devices to an appropriate audio device. 3. Remove the lens cap and turn the projector on _P. 28 On the On the remote projector control 16
  • Sharp XV-Z3100 | Operation Manual - Page 19
    . 29 Select the "INPUT 4" using the INPUT buttons on the projector or the INPUT 4 button on the remote control. On the On the remote On-screen display projector control INPUT 4 • When pressing the INPUT buttons on the projector, input mode switches in the following order: INPUT1 INPUT2 INPUT3
  • Sharp XV-Z3100 | Operation Manual - Page 20
    that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN-60KT ceiling-mount bracket, its ANTK201 and AN
  • Sharp XV-Z3100 | Operation Manual - Page 21
    (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can set the PRJ Mode in "Options2" menu. See page 49.) I Table mounted, front projection I Ceiling mounted, front projection Setup
  • Sharp XV-Z3100 | Operation Manual - Page 22
    the screen at the optimum size by referring to the table below. Use the values in the table as a reference when installing the projector. When using a wide screen (16:9) and projecting 16:9 image Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Distance from the lens center
  • Sharp XV-Z3100 | Operation Manual - Page 23
    When using a normal screen (4:3) and projecting 16:9 image Picture (Screen) size Diag. [χ] Width Height 300Љ (762 cm) 240Љ (610 cm) 180Љ (457 cm) 270Љ (686 cm) 216Љ (549 cm) 162Љ (411 cm) 250Љ (635 cm) 200Љ (508 cm) 150Љ (381 cm) 200Љ (508 cm) 160Љ (406 cm) 120Љ (305 cm) 150Љ (381 cm) 120Љ
  • Sharp XV-Z3100 | Operation Manual - Page 24
    HDMI video Cable HDMI cable (commercially available) Terminal on the projector INPUT6 Component video Component cable (commercially available) Component video 3 RCA to 15-pin D-sub cable (optional accessory: AN-C3CP2) S-video cable (commercially available) S-video INPUT1, 2 INPUT5 INPUT3
  • Sharp XV-Z3100 | Operation Manual - Page 25
    turn off the devices to be connected. After making all connections, turn on the projector first and then the other devices. When connecting the component video equipment to the component input terminal on the projector (INPUT1 or INPUT2) To component output (Y, CB/PB, CR/PR) terminal DVD, etc. To
  • Sharp XV-Z3100 | Operation Manual - Page 26
    output terminal DVD, etc. To INPUT3 terminal S-video cable (commercially available) When connecting to equipment with video output terminal (INPUT4) To video output terminal Supplied accessory Video cable DVD, etc. To INPUT4 terminal Video cable 24
  • Sharp XV-Z3100 | Operation Manual - Page 27
    15-pin D-sub cable (optional accessory: AN-C3CP2) When connecting to equipment with HDMI output teminal (INPUT6) HDMI is a new specialized interface capable of delivering a video and audio signal to the terminal using just one cable. Since this projector does not support an audio signal by itself
  • Sharp XV-Z3100 | Operation Manual - Page 28
    operation manuals of the devices to be connected before making connections. To RGB output terminal Computer Supplied accessory To keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's external
  • Sharp XV-Z3100 | Operation Manual - Page 29
    to a computer with a DIN-D-sub RS232C adaptor (optional accessory: AN-A1RS) and an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. See page 60 for detail. When connecting to a computer
  • Sharp XV-Z3100 | Operation Manual - Page 30
    indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up or shutting down. Red:The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced
  • Sharp XV-Z3100 | Operation Manual - Page 31
    • The power indicator on the projector blinks in green while cooling. • The power indicator changes to red when the projector finishes cooling. STANDBY button On-screen button on the remote control to select the desired input mode. • When pressing INPUT (P/R) on the projector, input mode switches
  • Sharp XV-Z3100 | Operation Manual - Page 32
    Image Projection (Continued) Adjusting the Projected Image 1 Adjusting the Focus You can adjust the focus with the focus ring on the projector. Rotate the focus ring to adjust the focus while watching the projected image. 2 Adjusting the Picture Size You can adjust the picture size using the
  • Sharp XV-Z3100 | Operation Manual - Page 33
    the procedures in Keystone Correction to correct the distortion. (See page 32.) Info • Do not apply too much pressure on the projector when the front adjustment foot comes out. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment foot and the
  • Sharp XV-Z3100 | Operation Manual - Page 34
    Image Projection (Continued) Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally.The function for correcting trapezoidal distortion is called Keystone Correction. There are the
  • Sharp XV-Z3100 | Operation Manual - Page 35
    Correction Select the Keystone correction method. Press c KEYSTONE on the remote control. • "GEOMETRIC ADJUSTMENT" will be displayed. • Each time trapezoidal distortion with Keystone correction, change the placement position of the projector. • Straight lines and the edges of the displayed image may
  • Sharp XV-Z3100 | Operation Manual - Page 36
    "RESIZE" to "STRETCH" (16:9). 1 Press c KEYSTONE on the remote control repeatedly until "GEOMETRIC ADJUSTMENT" is displayed. 2 Adjust the focus, until the displayed red arrows line up in the upper left. R On-screen display Adjust upper left corner GEOMETRIC ADJUSTMENT ADJUST RESET NEXT END
  • Sharp XV-Z3100 | Operation Manual - Page 37
    confirmation screen displays before the "H & V KEYSTONE" screen, asking if you want to reset the adjustments or not. Then select RESET. R On-screen display H&V KEYSTONE END ENTER ADJUST RESET 3 Press P or R on the remote control to align the left and right sides of the projected image. Vertical
  • Sharp XV-Z3100 | Operation Manual - Page 38
    "STRETCH", "SIDE BAR", "CINEMA ZOOM" or "DOT BY DOT (Computer input only)" image. Press m RESIZE on the projector or jRESIZE on the remote control. On the projector On the remote control RESIZE button VIDEO RESIZE button • "STRETCH" is fixed when 540P, 720P or 1080I signals are entered. Input
  • Sharp XV-Z3100 | Operation Manual - Page 39
    Computer Input Signal Computer Image type STRETCH Output screen image SIDE BAR CINEMA ZOOM DOT BY DOT VGA, SVGA XGA (1024K768) 4:3 aspect ratio 4:3 aspect ratio 1280K720 16:9 aspect ratio : Cutout area on which images cannot be projected. Note • You can select "CINEMA ZOOM" when with a "VGA
  • Sharp XV-Z3100 | Operation Manual - Page 40
    Operating with the Remote Control Selecting the Picture Mode You can select the appropriate picture mode to best match the projected image you are watching. Press kPICTURE MODE. • When
  • Sharp XV-Z3100 | Operation Manual - Page 41
    Movie1 Movie2 Memory Contrast -30 +30 Bright -30 +30 Color -30 +30 *2 Tint -30 +30 *2 Sharp -30 +30 *2 Red -30 +30 Blue -30 +30 Page 43 PAGE 2 Picture Picture Mode CLR Temp BrilliantColor™ C. M. S. Progressive DNR IRIS Lamp Setting Reset SEL./ADJ. RETURN 7500K 1 INPUT 1 Standard 3D
  • Sharp XV-Z3100 | Operation Manual - Page 42
    INPUT 6. "Options2" menu Options 2 PRJ Mode RS-232C STANDBY Mode Fan Mode All Reset Language INPUT 1 Front 9600 bps Eco Normal English SEL./ADJ. RETURN 40 ENTER END Page 48 Background Page 48 Auto Power Off [On/Off] Page 49 Lamp Timer(Life) Page 49 Standard Enhanced Blue None PRJ Mode Page 49
  • Sharp XV-Z3100 | Operation Manual - Page 43
    • This operation can also be performed by using the buttons on the projector. 1 Press dMENU. • The "Picture" menu screen for the selected input for INPUT 1 mode Selected input mode Menu icons Picture Picture Mode Contrast Bright Color Tint Sharp Red Blue INPUT 1 Standard 0 0 0 0 0 0 0 Note • The
  • Sharp XV-Z3100 | Operation Manual - Page 44
    . • The selected item is highlighted. Picture Picture Mode Contrast Bright Color Tint Sharp Red Blue INPUT 1 Standard 0 0 0 0 0 0 0 SEL./ the item selected. • The adjustment is stored. Picture Picture Mode Contrast Bright Color Tint Sharp Red Blue INPUT 1 Standard 0 15 0 0 0 0 0 5 Press dMENU
  • Sharp XV-Z3100 | Operation Manual - Page 45
    Color Tint Sharp Red Blue INPUT 1 Standard 0 0 0 0 0 0 0 Q PAGE 2 Picture Picture Mode CLR Temp BrilliantColor™ C. M. S. Progressive DNR IRIS Lamp Setting Reset in memory. Note • You can also press k PICTURE MODE on the remote control to select the picture mode. (See page 38.) • The default
  • Sharp XV-Z3100 | Operation Manual - Page 46
    are reset to the default setting. Adjusting "Hue", "Saturation", or "Value". 1Press P or R to select either "Hue", "Saturation", or "Value" and then press i ENTER. 2Select the color to be adjusted with P or R and adjust it with O or Q. Example of adjusting the "Hue" Main colors O button R (Red
  • Sharp XV-Z3100 | Operation Manual - Page 47
    following cases: • When the image is blurry. • When the contours and colors of moving im- ages drag. • When TV broadcasts with weak signals are projected You can also use l IRIS on the remote control to change the Iris. (See page 38.) 8 Lamp Setting Selectable items Bright Eco + Quiet Brightness
  • Sharp XV-Z3100 | Operation Manual - Page 48
    Fine Sync Clock Phase H-Pos V-Pos Reset Special Modes Auto Sync INPUT 5 0 remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual
  • Sharp XV-Z3100 | Operation Manual - Page 49
    Using the "Options" Menu Options 1 1 Overscan H 1 Overscan V 2 Subtitle 3 OSD Display 4 Video System 5 Signal Type 6 HDMI Setting 7 Background 8 Auto Power Off 9 Lamp Timer(Life) SEL./ADJ. RETURN INPUT 1 0 0 0 On Auto Auto Standard Blue On 0h ENTER END 100% Menu operation n Page 41 2
  • Sharp XV-Z3100 | Operation Manual - Page 50
    You can also select "Signal Type" using g RGB/COMP. on the remote control (INPUT 5 or INPUT 6). Selectable items Description PAL When connected to picture may not be displayed if the device's output signal type and the projector's input signal type do not match. If this should occur, switch the
  • Sharp XV-Z3100 | Operation Manual - Page 51
    no input signal is detected for more than 15 minutes, the projector will automatically enter standby mode. The Auto Power Off function will be disabled. Options 2 1 PRJ Mode 2 RS-232C 3 STANDBY Mode 4 Fan Mode 5 All Reset 6 Language Menu operation n Page 41 INPUT 1 Front 9600 bps Eco Normal
  • Sharp XV-Z3100 | Operation Manual - Page 52
    Use "All Reset" to initialize all the adjustments you have made to the default settings. Note The following items cannot be initialized. • "Fine Sync" menu - Special Modes • "Options1" menu - Lamp Timer (Life) - Language Standard Eco The RS-232C function is activated even if the projector is in
  • Sharp XV-Z3100 | Operation Manual - Page 53
    with water Appendix Mild detergent Wax Thinner Info • If you want to clean the air vents during projector operation, ensure you press S STANDBY/ON on the projector or aSTANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents. 51
  • Sharp XV-Z3100 | Operation Manual - Page 54
    Cleaning and Replacing the Dust Filters Cleaning the Dust Filters Info • The dust filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. 1 Press SSTANDBY/ON on the projector to put the projector into standby mode. •
  • Sharp XV-Z3100 | Operation Manual - Page 55
    will not turn on unless it is correctly installed. Replacing the Dust Filters Info • If the filters become too dirty to clean effectively, purchase new ones (PFILDA025WJZZ) from your nearest Sharp Authorized Projector Dealer or Service Center. Reinforcement seal After removing the filter holders
  • Sharp XV-Z3100 | Operation Manual - Page 56
    try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Lamp indicator Temperature warning indicator Red on Green on Red blinks Green blinks Green on Green blinks Red on Off Red on Normal (Standby) Normal
  • Sharp XV-Z3100 | Operation Manual - Page 57
    (See page 57.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator blinks in red even when the dust filter holders and lamp unit cover are securely
  • Sharp XV-Z3100 | Operation Manual - Page 58
    the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XV-Z3100 | Operation Manual - Page 59
    the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). 1 2 User service screw (for lamp unit cover) Appendix 57
  • Sharp XV-Z3100 | Operation Manual - Page 60
    the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws 2 3 1 Resetting the Lamp Timer Reset the lamp timer after replacing
  • Sharp XV-Z3100 | Operation Manual - Page 61
    ) 11 15 4. Not connected 5. Not connected 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) male connector of the DIN-D-sub RS-232C adaptor (optional accessory: AN-A1RS) Pin No. Signal Name I/O Reference 1 Projector Computer Pin No. Pin No. 4 4 5 5 6 6 59 Appendix
  • Sharp XV-Z3100 | Operation Manual - Page 62
    0DH) Command 4-digit Parameter 4-digit Response code format Normal response O K Return code (0DH) Problem response (communication error or incorrect command) E R R Return code (0DH) Info • When controlling the projector using RS-232C commands from a computer, wait for at least 30 seconds after
  • Sharp XV-Z3100 | Operation Manual - Page 63
    TTL level • Compatible with sync on green signal • Expansion System resizing technology The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC PC MAC 13" MAC 16" MAC 19" Resolution 640 × 350 640 × 400 VGA 720
  • Sharp XV-Z3100 | Operation Manual - Page 64
    Troubleshooting Problem Check Picure does not appear or projector does not start. No picture appears (or picture is dark). • Projector power cord is to the projector. • Remote control battery has run out. • External output has not been set when connecting notebook computer. • The lamp unit cover
  • Sharp XV-Z3100 | Operation Manual - Page 65
    need to be changed. time to turn on. While the remaining lamp life draws to a close, replace the lamp. Picture is dark. The remote control cannot be used. • Operate the remote control while pointing it at the projector's remote control sensor. • The remote control may be too far away from the
  • Sharp XV-Z3100 | Operation Manual - Page 66
    Specifications Product type Projector Model XV-Z3100 Video system NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/ DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50 Display method DLP® chip Panel size: 0.62" Drive method: Digital Light Processing (DLP®) No. of dots: 921,
  • Sharp XV-Z3100 | Operation Manual - Page 67
    Dimensions Units: inches (mm) 13 64/ (5) 11 1/32 (280) 23 64/ (9) 7/16 (11) 4 19 64/ (109) 2 7/8 (73) 1 55 64/ (47) ø9 7/64 (69.2) 3 5/32 (80) 12 /13 32 (315) 3 1/16 (77.5) 7/16 (11) 1 7/8 (47.5) 4 7/64 (104) 1 /11 32 (33.8) 2 /61 64 (75) 1 /53 64 (46.2) 2 /19 32 (65.5) 65 Appendix
  • Sharp XV-Z3100 | Operation Manual - Page 68
    Projection Distance ....... 20 Power cord 28 PRJ Mode 19, 49 Progressive 44 R-03 batteries 14 Rear adjustment foot 31 Red 43 Remote control 13 Remote control sensor 15 Replacing the lamp 56, 57 Resize 36, 37 RESIZE button 36 RETURN button 41 RGB/COMP. button 48 RS-232C Setting 50 RS
  • Sharp XV-Z3100 | Operation Manual - Page 69
    Printed in China Gedruckt in China Imprimé en Chine Triykt i Kina Impreso en China Stampato in Cina Gedrukt in China TINS-C777WJZZ 06P11-CH-NG
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
ENGLISH
DEUTSCH
FRANÇAIS
XV-Z3100
SVENSKA
ESPAÑOL
ITALIANO
NEDERLANDS
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
BRUKSANVISNING
MANUAL DE MANEJO
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
PROJECTOR
PROJEKTOR
PROJECTEUR
PROJEKTOR
PROYECTOR
PROIETTORE
PROJECTOR