Singer 1 One Instruction Manual 2 - Page 47
projection
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
45 To Adjust the Rufiler for Gathering The adjusting finger (F, Fig. 43) is not intended for gathering and should be moved forward or away from the needle, as shown in Fig. 43. .00 • 40 ' Pe .J. 4k4 b„ FIG. 43 Raise the adjusting lever (E, Fig. 43) and move it to the left so that the projection (D, Fig. 43) will enter the slot marked "1" in the-adjusting lever (E) when the lever is released. The ruffling blade will then move forward and back once at every stitch. Insert the material to be ruffled between the two blue blades, following the line 2 in Fig. 42. Draw the material slightly back of the needle, lower the presser bar and commence to sew. To make fine gathering, shorten the stroke of the :ruffling blade, also shorten the stitch. To make full gathering, lengthen the stroke of the ruffling blade by turning the adjusting screw (C) downwardly, also lengthen the stitch. By varying these adjust-. merits, many pleasing varieties of work can be accomplished.