Singer 14CG754 ProFinish Instruction Manual 15 - Page 30

Chaining, Sewing

Page 30 highlights

21. CHAINING OFF AND TEST SEWING • When the machine is completely threaded, bring all of the threads over the throat plate and slightly to the left under the presser foot. • Hold the threads and apply a slight tension. • Turn the hand wheel toward you 2 or 3 complete turns to start the thread chain. • Lower presser foot. • Continue holding the chain and press on the foot controller until the chain is 5 - 7.5cm (2 - 3 inches) in length. SUOMI 5- 7.5 cm 2 - 3);) • Place fabric under the front of the presser foot and sew a test sample. Note: Do not pull on the fabric while sewing as this may deflect the needle, causing it to break. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

21.
CHAINING
OFF
AND
TEST
SEWING
When
the
machine
is
completely
threaded,
bring
all
of
the
threads
over the
throat
plate
and
slightly
to
the
left
under
the
presser
foot.
Hold
the
threads
and
apply
a
slight
tension.
Turn
the
hand
wheel
toward
you
2
or
3
complete
turns
to
start
the
thread
chain.
Lower
presser
foot.
Continue
holding
the
chain
and
press
on
the
foot
controller
until
the
chain
is
5
7.5cm
(2
3
inches)
in
length.
Place
fabric
under
the
front
of
the
presser
foot
and
sew
a
test
sample.
Note:
Do
not
pull
on
the
fabric
while
sewing
as
this
may
deflect
the
needle,
causing
it
to
break.
SUOMI
5-
7.5
cm
2
-
3
)
;)
29