Singer 14HD854 Heavy Duty Serger Refurbished Accessory User Guide - Page 44

Gathering Foot

Get Singer 14HD854 Heavy Duty Serger Refurbished PDF manuals and user guides View all Singer 14HD854 Heavy Duty Serger Refurbished manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

OVERLOCK SEWING AND EMBELLISHMENT GATHERING FOOT #250060596 M/C Code: SA The Gathering Foot is used to form gathers in fabric. It can gather a single fabric or gather and attach to a second flat fabric simultaneously. It works best on light to medium weight fabrics. Setting up the Serger: Needles: Two or one Stitch Type: Three or four-thread overlock Stitch Length: Longer Stitch Differential Feed: Higher Setting Upper Knife: Engaged To gather a single layer of fabric: 1. Snap the Gathering Foot onto the machine. 2. Position the fabric under the foot from the left side. 3. Lower the presser foot and sew. Note: A longer stitch length, tighter tension and increasing the differential feed will produce fuller gathers. To gather and attach a second flat fabric simultaneously: 1. Snap the Gathering Foot onto the machine. 2. The width of the seam allowance can be adjusted by loosening the screw on the front of the foot, sliding the guide to the desired position, then re-tightening the screw. 3. Place the fabric to be gathered right side up, between the Gathering Foot and the needle plate. 4. Place the fabric that will NOT be gathered into the opening of the foot with the right side down. 5. Lower the presser foot and sew. Keep the two layers of fabric aligned to the guide on the right of the foot. Let them feed together while gathering and stitching together. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
44
GATHERING FOOT
#250060596
M/C Code: SA
The Gathering Foot is used to form gathers in fabric. It can
gather a single fabric or gather and attach to a second flat fabric
simultaneously. It works best on light to medium weight fabrics.
Setting up the Serger:
Needles:
Two or one
Stitch Type:
Three or four-thread overlock
Stitch Length:
Longer Stitch
Differential Feed:
Higher Setting
Upper Knife:
Engaged
To gather a single layer of fabric:
1.
Snap the Gathering Foot onto the machine.
2.
Position the fabric under the foot from the left side.
3.
Lower the presser foot and sew.
To gather and attach a second flat fabric simultaneously:
1.
Snap the Gathering Foot onto the machine.
2.
The width of the seam allowance can be adjusted by loosening
the screw on the front of the foot, sliding the guide to the desired
position, then re-tightening the screw.
3.
Place the fabric to be gathered right side up, between the Gathering
Foot and the needle plate.
4.
Place the fabric that will NOT be gathered into the opening of the
foot with the right side down.
5.
Lower the presser foot and sew. Keep the two layers of fabric
aligned to the guide on the right of the foot. Let them feed together
while gathering and stitching together.
Note:
A longer stitch length, tighter tension
and increasing the differential feed will
produce fuller gathers.
OVERLOCK SEWING AND EMBELLISHMENT