Singer 14T968DC PROFESIONAL 5 Instruction Manual - Page 87
hand and pull Threader lever C up into place D.
View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
10. Thread the looper eye (A) from front to back. Pull about 4 inches of thread. Position thread into V cutout (B) on threader. Firmly hold thread tail with left hand and pull Threader lever (C) up into place (D). "V" cutout Threader Lever NOTE: Make sure the Upper Looper thread is behind the Lower Looper thread. Three-Thread Flatlock (narrow) page 11
Three-Thread Flatlock (narrow) page 11
10. Thread the looper eye (A) from front to back.
Pull about 4 inches of thread.
Position thread into V cutout (B) on threader.
Firmly hold thread tail with left
hand and pull Threader lever (C) up into place (D).
NOTE: Make sure the Upper Looper thread is
behind the Lower Looper thread.
Threader Lever
āVā cutout