Singer Athena Instruction Manual - Page 14
Winding The Bobbin
![]() |
View all Singer Athena manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
WINDING THE BOBBIN Be sure to use Class 15 J bobbins. 1. Place a spool of thread on the spool pin, and secure it with the spool pin cap. Pull the thread out from the spool and place it through thread guides as shown in illustration. 1 2. Put end of thread through the hole in bobbin as shown. 2 3. Push bobbin winder shaft to far left position, if it is not already there. Place bobbin onto shaft with end of thread 3 coming from top of bobbin. Push bobbin winder shaft to the right until it clicks. Hold onto end of thread. 4. Start machine. After the bobbin has begun to fill, stop to cut 4 the thread tail. Step on the foot control again to continue to fill the bobbin. The bobbin will automatically stop turning when completely filled. Push shaft to the left to remove bobbin and cut thread. 14
![](/manual_guide/products/singer-athena-instruction-manual-f50b4f3/14.png)