Singer Confidence 7640 Instruction Manual and Troubleshooting Guide - Page 22
Stitch Selection
View all Singer Confidence 7640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
23 START SEWING Stitch Selection A. Utility Stitch Patterns B. Decorative Stitch Patterns For examples of other stitch patterns and further instruction, see the Stitch Reference Guide at www. singerco.com. Choosing Utility and Decorative Stitch Patterns: The machine will automatically default to the Pattern Mode and Straight Stitch when turned on. You can also select the mode for additional decorative stitches or the mode for AlphaNumeric Stitch Patterns. Choose the mode and then press the two left + or - Pattern Adjustment Buttons to select the number of the stitch that you desire. Adjusting the Width or the Length of the Stitch: The machine will automatically default to a preset stitch width and stitch length for optimum results. These settings are displayed on the LCD screen. You can adjust the width or the length of most stitches by toggling between the Stitch Width and the Stitch Length Buttons. The button on the left controls the width and the button on the right controls the length. 1. To increase the width of the stitch press the + button, and to decrease the width of the stitch, press the - button. When Utility Stitch Patterns 01 to 05 are selected, the needle position is regulated by the Stitch Width Adjustment Button. Pressing - will move the needle to the left and pressing + will move the needle to the right. On 3.5 the needle is positioned in the center for straight stitch. 2. To increase the length of the stitch press the + button and to decrease the length of the stitch, press the - button. The stitch width can be adjusted to 7.0 for most stitches. Some stitches have a limited stitch width. The stitch length can be adjusted from 0.0 to 4.5 for most stitches. Some stitches have a limited stitch length. 22