Singer Designer Bundle User Manual - Page 10
Troubleshooting
View all Singer Designer Bundle manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Troubleshooting PROBLEM The iron is plugged in but soleplate is cold. No steam released. Steam Burst not working. No spray mist released. Soleplate is too cool. Water leaks from soleplate. Damage to fabric. Flakes and impurities come out of the soleplate holes during ironing. POSSIBLE CAUSE SOLUTION Electrical outlet does not work. Plug in to another outlet. There is a connection problem. The temperature setting has been set to "Low". Check if the plug is inserted in the outlet properly. Set the temperature setting to a higher temperature. Low water in the Water Tank. Fill the Water Tank using instructions found in this manual. Steam Selector is in Steam Off position. Turn the Steam Selector to Steam ON position. Low water in the Water Tank. Fill the Water Tank using instructions found in this manual. First time use. Press the Burst of Steam Button a few times until Steam Burst is released. Low water in the Water Tank. Fill the Water Tank using instructions found in this manual. First time use. Press the Spray Button a few times until spray mist is released. Incorrect Temperature Setting. Turn Temperature Control Dial until you reach the correct (higher) temperature setting. Steam Iron's heat setting is too low Set temperature setting to Max position to produce steam. using the Temperature Control Dial. Steam Selector is in the 'ON' posi- Turn the Steam Selector to ( ) position tion while refilling Water Tank. before refilling Water Tank. Pressing Steam Button to many times and too quickly. Press Steam Button slower and press only 2-3 times. Temperature setting is too high. Follow the garment guide or test the inside of the garment before ironing. Adjust temperature setting accordingly. You have been using hard water, which has caused scale flakes to develop inside the soleplate. Perform Self-Cleaning one or more times. See "Self-Cleaning" section of this manual. This electrical appliance complies with directive 2002/96/EC (Waste Electrical and Electronic Equipment - WEEE). The meaning of the crossed-through waste bin symbol on the appliance is the product must be disposed of separately to other household waste at the end of the useful life of the appliance. The user is responsible for delivering appliance to an appropriate collection center at that time. Appropriate separate collection for environment-friendly treatment and recycling prevents or reduces harmful effect on the environment and human health. You can obtain information on available collection services in your area by contacting your local Council waste collection department, or the retailer from which you bought the appliance. 10 - ENGLISH