Singer M3330 User Manual - Page 13

Winding the Bobbin -- Place thread and corresponding spool holder on to spool pin. (1/2) -- Snap thread into thread guide. (3) -- Wind thread clockwise around bobbin winder tension discs. (4) -- Thread bobbin as illustrated and place on spindle. (5) -- Push bobbin spindle to right. (6) -- Hold thread end. (7) -- Step on foot control pedal. (8) -- Release the pedal after a few turns. Release the thread and cut as close as possible to the spool. Press the pedal again. Once the spool is full, it rotates slowly. Release the pedal and cut thread. (9) -- Push bobbin spindle to left (10) and remove. Please Note: When the bobbin winder spindle is in "bobbin winding" position, the machine will not sew and the hand wheel will not turn. To start sewing, push the bobbin winder spindle to the left (sewing position). 6