Singer Start 1304 Instruction Manual - Page 28
Winding the Bobbin - start sewing machine
View all Singer Start 1304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
EN Winding the Bobbin - Place the thread and spool pin felt (a) onto the spool pin. (1) - Pass the thread through the thread guide. (2) - Wind thread clockwise around bobbin winder tension discs. (3) - Thread bobbin as illustrated and place on spindle. (4) - Push bobbin spindle to right. (5) - Hold thread end. (6) - Step on foot control pedal. (7) - Release the pedal after a few turns. Release the thread and cut as close as possible to the spool. Press the pedal again. Once the spool is full, it rotates slowly. Release the pedal and cut thread. (8) - Push bobbin spindle to left (9) and remove. 1 Please Note: When the bobbin winder spindle is in "bobbin winding" 3 position, the machine will not sew and the hand wheel will not turn. To start sewing, push the bobbin winder spindle to the left (sewing position). 6 11 2 4 5 7 8 9