Smeg C24GGXU Owners Manual - Page 23
Special Maintenance
View all Smeg C24GGXU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Instructions for the user 9. SPECIAL MAINTENANCE The oven may require special maintenance or replacement of parts subject to wear such as gaskets, bulbs, etc. The following instructions describe how to perform these minor maintenance operations. WARNING ELECTRICAL SHOCK HAZARD Before servicing, disconnect the appliance from the power supply. 9.1 Removing the door Open the door completely. Insert a pin in the hole in the hinge. Repeat this operation on both hinges. Grasp the door on both sides with both hands, lift it forming an angle of about 30° and remove it. To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting completely at the bottom of the slots. Lower the door and once it is in place remove the pins from the holes in the hinges. 9.2 Replacing the oven light bulb 1 Completely remove all accessories from inside the oven. 2 Remove the racks/trays support frames. 3 Remove the bulb cover using a tool (e.g. a screwdriver). Incandescent lamps: 4 Unscrew and remove the lamp. 5 Replace the lamp with one of the same type (25W). 6 Replace the cover correctly, so that the moulded part of the glass is facing the door. 7 Press the cover completely down so that it attaches perfectly to the bulb support. 25