Smeg CPF36UGMOR Instruction Manual 1 - Page 34

Cleaning the top Vapor Clean, Preliminary operations, Risk of damage to the appliance, Risk

Page 34 highlights

Cleaning and Maintenance Cleaning the top section The oven cavity is fitted with a tilting heating element which facilitates cleaning the top part (roof) of the oven. 1. Free the upper heating element by gently lifting it and rotating its retainers by 90 degrees. Vapor Clean Vapor Clean is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this process, it is possible to clean the inside of the oven very easily. The dirt residues are softened by the heat and water vapour for easier removal afterwards. Improper use Risk of damage to surfaces 2. Gently lower the heating element until it stops. • Remove any food residues or large spills from previous cooking operations from the inside of the oven. • Carry out assisted oven cleaning operations only when the oven is cold. Improper use Risk of damage to the appliance • Do not excessively flex the element during cleaning. Preliminary operations Before starting the Vapor Clean function: • Completely remove all accessories from inside the oven. • Remove the rack/tray support frames. • Detach removable guides, where fitted. • Close the door. 3. When you have finished cleaning, place the heating element back in position and turn the retainers to lock it in place again. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

Cleaning and Maintenance
36
Cleaning the top section
The oven cavity is fitted with a tilting heating
element which facilitates cleaning the top
part (roof) of the oven.
1. Free the upper heating element by gently
lifting it and rotating its retainers by
90 degrees.
2. Gently lower the heating element until it
stops.
3. When you have finished cleaning, place
the heating element back in position and
turn the retainers to lock it in place again.
Vapor Clean
Preliminary operations
Before starting the Vapor Clean function:
Completely remove all accessories from
inside the oven.
Remove the rack/tray support frames.
Detach removable guides, where fitted.
Close the door.
Improper use
Risk of damage to the appliance
Do not excessively flex the element
during cleaning.
Vapor Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Improper use
Risk of damage to surfaces
Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
Carry out assisted oven cleaning
operations only when the oven is cold.