Smeg KLF04CRUS User manual - Page 13
Press the START/STOP key
View all Smeg KLF04CRUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
EN Use 4. Fill the kettle with the required quantity of water, referring to the marks on the level indicator (2). 2 6. Insert the plug into the power socket. All the LEDs will come on and a beep will sound to indicate that the appliance has been turned on. The LEDs of the START/ STOP and Keep Warm keys switch off after 2 seconds and the default temperature set is 212°F. 7. Use the temperature selector (3) to select the required temperature. Move the temperature selector to the left to decrease the temperature. Move the temperature selector to the right to raise the temperature. 5. Close the lid again and place the kettle back on its base. 4 3 8. Press the START/STOP key (4): the LED will come on and a beep will sound to indicate that the cycle has started. The LED of the selected temperature will turn on, while those for the temperatures below the one set will flash and then turn on progressively as the water reaches the corresponding temperature. 9. When the water reaches the set temperature, the corresponding LED and those of the temperatures below it will all be lit. The LED of the START/STOP key turns off and the appliance beeps to indicate the end of the cycle. 15