Smeg STU8649 User manual - Page 14
Washing programs, 3 Switching
View all Smeg STU8649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
User instructions 3.2 Washing programs Before starting a washing program make sure that: The water supply tap is open. The softener container contains regenerating salt. The correct amount of detergent has been added to the dispenser. The baskets have been correctly loaded. The spray arms are able to rotate freely and without obstruction. The dishwasher door is securely closed. Warning: during the initial phase of the washing program, the operation of sprayers is not perceived because they start rotating about 5 minutes after the start. This is the normal operation of the washing cycle. 3.3 Switching on Press the on/off button to start the dishwasher. Then wait for one of the program indicator light to turn on. IMPORTANT The door of the dishwasher must ble closed within 4 seconds after use of the program selection button for all functions (e.g. program selection, change, delection, etc.). If the door is not closed within 4 seconds, one or more program lights (depending on the current opertaion) will flash at high speed to indicate that the operation must be confirmed before the door is closed. To confirm, simply press the program selection button once and the flashes will slow down; close the door an once to start/restart the dishwasher. The same applies if the dishwasher is opened with the program delay option set and the cycle not started (e.g. to add more dishes): the program selection button must be pressed before the door is closed, restarting the program delay countdown. If the door of the diishwashehas not been closed or has been incorrectly closed, the washing cycle will not begin. 14