Snapper RE110 Operater's Manual - Page 14
Stopping - Engine, Wheel Drive, Blade, Operation, WARNING
View all Snapper RE110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operation ! WARNING ! DO NOT leave the machine with the engine running. STOP Blade. STOP engine. Shift to neutral and engage park brake. Remove key. Stopping - Engine, Wheel Drive, Blade Engine 1. Stop the engine by turning the key (A, Figure 13) to the "OFF" position. Mower Blade 1. Stop the mower blade by releasing the blade pedals (A, Figure 15) or moving the blade lever (B) rearward to the "OFF" position. B A r n A ot fo ctio Figure 13: Turning key to 'Off' N du Wheel Drive 1. Stop motion of the Rear Engine Rider by pushing the o clutch/brake pedal (A, Figure 14) all the way down to r apply the brake. Figure 15: Stopping the mower blade ! WARNING ! Once blade is disengaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate after 3 seconds, the blade brake must be adjusted. Refer to Section "BLADE BRAKE ADJUSTMENT" for adjustment procedures or return machine to an authorized dealer for adjustment. DO NOT CONTINUE to operate machine until blade brake is adjusted and functioning properly. RepA Figure 14: Engaging the clutch/brake pedal 14 www.snapper.com