Sony Ericsson R250 PRO User Guide - Page 8
Charging the Battery, Charging only - ericsson
View all Sony Ericsson R250 PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
EricssonNoMtofboilreCCoommmmerucniiaclatUisoens AB • the indicator light on top of the phone starts flashing red If you have an Ericsson-approved battery, you can check the remaining talk # and standby times in the Status menu by sliding the volume key upwards or downwards in standby mode. You can move downwards in the menu by pressing . The remaining standby and talk times depend on the type of battery you use and your position in the network. Please note that these times are approximate and you may have 20% less time than is shown in the display. Note! The phone turns itself off when the battery can no longer power it satisfactorily. Charging the Battery 1. Make sure that the battery is 3. Connect the charger to the phone attached to the phone. as shown. The flash symbol on the 2. Connect the charger to the mains. plug must face upwards. Note! The mains plug may look different depending on the mains socket in your country. Do not connect it to any other item than you Ericsson Travel Charger CTR-10. It must not be separated from the charger when plugged into the mains socket. To indicate charging: • the indicator on the top of the phone shows a steady red light (or green, if the phone is switched on) • the message Charging only is shown in the display • the battery meter in the display pulses continuously Note! If you charge a new battery that is empty, or a battery that has not been used for a long time, it may take a while until you get an indication of charging in the display. Only then can you switch on and use your phone. Preparing Your Phone for Use 7