Sony Ericsson SmartBand 2 User Guide - Page 4
Charging your SmartBand 2, Battery notification light status, Low battery level notification
View all Sony Ericsson SmartBand 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
10 Micro USB port 11 NFC detection/tapping area The ventilation hole is not used for resetting the device. Do not insert or force sharp objects in the hole as this may damage the device. Charging your SmartBand 2 Before using your SmartBand 2 for the first time, you need to charge it for approximately 30 minutes. Sony chargers are recommended. Your SmartBand 2 turns off automatically when the charger is connected. You cannot turn on the device while a charger is connected. To charge your SmartBand 2 1 Plug one end of the USB cable into the charger or into the USB port of a computer. 2 Plug the other end of the cable into the Micro USB port of your SmartBand 2. 3 While the battery is charging, notification light A changes from red to orange. The notification light changes to green when you reach 90% battery power. Make sure the USB port is dry before you insert a USB cable into the port. Your SmartBand 2 turns off when connecting to a charger, and goes back to its previous on/off state when the charger is unplugged. Battery notification light status Red light Orange light Green light Battery is charging and the charge level is less than 15%. Battery is charging and the charge level is between 15% and 90%. Battery is charging and the charge level is greater than 90%. To check the battery level of your SmartBand 2 • From the main application screen of your Android™ device, find and tap the SmartBand 2 application, the battery percentage level appears on the screen. Low battery level notification When your SmartBand 2 reaches a specific battery level, the device vibrates and the red light starts flashing every 4 seconds until you charge the device or it powers off. The low battery level notification is triggered when you have approximately 5 minutes left in Heart Activity mode and 75 minutes in STAMINA mode. The time varies depending on usage. When battery level is below 1%, your SmartBand 2 automatically turns off. You need to charge your SmartBand 2 when the battery runs out of power. If the "Do not disturb" function is turned on, you will not get the low battery notification. 4 This is an Internet version of this publication. © Print only for private use.