Sony Ericsson Style Cover SCR26 User Guide - Page 4
One-touch setup, Open the Style Cover Window accessory.
View all Sony Ericsson Style Cover SCR26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
1 Make sure that the Style Cover Window is properly attached to your phone and that the cover is closed. 2 Plug one end of the USB cable into the Micro USB port of your phone. 3 Plug the other end of the cable into the charger or into the USB port of a computer. 4 Make sure the charger or computer is connected to an active power source. Avoid opening the cover while the USB cable is attached as such action could damage the cable connector and/or Micro USB port over time. One-touch setup With one-touch setup, all you have to do is touch the NFC area of your smartphone to the NFC area of the Style Cover Window. The NFC function launches the setup procedure and you can then customise your smart window functions and settings. To set up the Style Cover Window for use 1 Open the Style Cover Window accessory. 2 Make sure that the NFC function on the phone is turned on and that the screen is active and unlocked, then place the back of the phone over the NFC detection area of the accessory, as indicated in the illustration. The NFC area of each device should touch the other. 3 Position the back cover of the phone over the adhesive gel pad in such a way that the camera lens fits directly over the corresponding opening on the back cover of the accessory. Once the phone is in the correct position, press down firmly on the front of the phone so that it becomes firmly attached to the adhesive gel pad. 4 This is an Internet version of this publication. © Print only for private use.