Sony Ericsson Xperia TX User Guide - Page 108
Focus mode, Video resolution, Self timer, Exposure value, White balance, frame stays sharp.
View all Sony Ericsson Xperia TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Identify a particular focus area by touching the camera screen with your finger. Camera key only Record a video by using only the hardware camera key. Focus mode The focus setting controls which part of a video should be sharp. When continuous autofocus is on, the camera keeps adjusting focus so that the area within the white focus frame stays sharp. Single autofocus The camera automatically focuses on the selected subject. Continuous autofocus is on. Face detection The camera automatically detects up to five human faces, indicated by frames on the screen. The camera automatically focuses on the nearest face. You can also select which face to focus on by tapping it on the screen. When you tap the camera screen, a green frame shows which face is selected and in focus. Face detection cannot be used for all scene types. Continuous autofocus is on. Video resolution Adjust the video resolution for different formats. Full HD Full HD (Full High Definition) format with 16:9 aspect ratio. 1920×1080 pixels. HD 720p HD (High Definition) format with 16:9 aspect ratio. 1280×720 pixels. VGA VGA format with 4:3 aspect ratio. 640x480 pixels. Multimedia message Record videos suitable for sending in multimedia messages. The recording time of this video format is limited to fit in a multimedia message. Self timer With the self timer you can record a video without holding the phone. Use it to record group videos where everyone can be in the video. You can also use the self-timer to avoid shaking the camera when recording videos. On (10 sec.) Set a 10-second delay from when you tap the camera screen until the video begins to record. On (2 sec.) Set a 2-second delay from when you tap the camera screen until the video begins to record. Off The video begins to record as soon as you tap the camera screen. Exposure value This setting allows you to determine the amount of light in the image you capture. A higher value indicates an increased amount of light. White balance The white balance setting adjusts the color balance according to the lighting conditions. Auto Adjust the color balance automatically to the lighting conditions. Incandescent Adjusts the color balance for warm lighting conditions, such as under light bulbs. Fluorescent Adjust the color balance for fluorescent lighting. 108 This is an Internet version of this publication. © Print only for private use.