Sony AIR-SW10TI S-AIR® Reception - Page 1

AIR-SW10Ti English To stabilize S-AIR reception Read the following when S-AIR reception is poor or unstable. To use S-AIR products (S-AIR main unit, subwoofer, and the optional sub unit) Before using S-AIR products, have the following ready. • Confirm the wireless transceivers are inserted correctly. Insert the wireless transceivers firmly to the depth into the slots of the S-AIR main unit, subwoofer, and the optional sub unit, respectively. • Confirm that the S-AIR IDs of the S-AIR main unit, subwoofer, and the optional sub unit are the same. The default setting of the S-AIR IDs of the S-AIR main unit, subwoofer, and the optional sub unit is "A." Depending on the S-AIR product, you can set the S-AIR ID by the switch or the setup menu. For details, refer to the operating instructions of each S-AIR product. Insert firmly Same S-AIR ID STANDBY iPod TUNER TUNING VOLUME A B C S-AIR ID About environments where S-AIR products (S-AIR main unit, subwoofer, and the optional sub unit) are used S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may cause lost connection or instability in S-AIR reception. • Electronic equipment influence The following may cause interference or cross talk. - Cellular phones, cordless phones - Wireless LAN, personal computers - Game machines using radio signals - Microwave ovens • Other factors The following may cause poor reception. - Materials or structures, such as walls and floors - The location where an S-AIR product is placed When using S-AIR products, place them as far as possible from the above electronic equipment, or place where S-AIR reception is stable. ©2009 Sony Corporation Printed in China 4-152-274-11(1) When S-AIR reception is poor Check the following. Keep cords that are connected to the S-AIR product (power cord, antennas or other cords) away from the wireless transceiver and slot. Keep as much space as possible around S-AIR products. Avoid placing S-AIR products on top of, or directly below, other electronic equipment. Avoid placing S-AIR products in a closed rack, metal rack, or under a table. Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is the most stable. Place so that the wireless transceivers of the S-AIR main unit, subwoofer, and the optional sub unit are closer. Place so that S-AIR products are separated from other wireless devices. Place so that S-AIR products are separated from metal doors or tables. If you cannot improve S-AIR reception, change the "RF CHANGE" setting. For details, refer to the operating instructions of each S-AIR product.