Sony AITE100-UL Operating Instructions - Page 20
Attaching the Dust Cover
UPC - 027242666115
View all Sony AITE100-UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Attaching the Dust Cover If the dust cover comes loose, attach it as described below. Note We recommend that you use the drive with the dust cover. 1 Align the dust cover's hinge clips (one on each side) with the pins of the drive bezel. • The dust cover should be positioned so that the magnets* on the cover's back face the drive bezel. * This magnet does not affect the tape of the cartridge. • Holding the dust cover at an angle as shown in the figure below, set the hinge clips on top of the bezel pins, positioning them so that they bracket the pins. Magnet Hinge clip Bezel pin 20 Part 3. Operation
20
Part 3.
Operation
Attaching the Dust Cover
If the dust cover comes loose, attach it as described below.
Note
We recommend that you use the drive with the dust cover.
1
Align the dust cover’s hinge clips (one on each side) with the pins of the
drive bezel.
• The dust cover should be positioned so that the magnets
*
on the cover’s
back face the drive bezel.
*
This magnet does not affect the tape of the cartridge.
• Holding the dust cover at an angle as shown in the figure below, set the
hinge clips on top of the bezel pins, positioning them so that they
bracket the pins.
Bezel pin
Magnet
Hinge clip