Sony AITI200ST User Guide - Page 27

Write-protecting a Cartridge Cartridges can be write-protected by sliding the tab on the back of the cartridge. In this state, data can be read from the tape but not written onto it. AIT-1 AIT-E Turbo AIT-1 Turbo AIT-2 Turbo AIT-2 AIT-3 AIT-3 Ex Using your fingernail, push the switch in the direction of the arrow to protect the tape from writing or accidental erasure. Return the switch to its original position to re-enable writing. Using a Cleaning Cartridge To keep the AIT drive in top condition, clean the head as needed using a head cleaning cartridge with the AIT logo. When the head needs cleaning, the CLEANING REQUEST indicator lights. Use the cleaning cartridge made exclusively for each model. AITi390-ST AITi200-A, AITi200-ST, AITi100-A, AITi100-ST, AITi50-A Cleaning cartridge to use SDX3X-CL SDX1-CL How to Clean 1 Load the head cleaning cartridge into the AIT drive. Cleaning starts automatically. 2 After about 15 seconds, cleaning will stop and the cartridge will be ejected automatically. Caution Do not rewind the cleaning cartridge and reuse it. When you reach the end of the cartridge, dispose it and buy a new cleaning cartridge with the AIT logo. 27