Sony BDP-BX1 Operating Instructions - Page 51
Network Settings, Internet Settings - wireless
View all Sony BDP-BX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Settings and Adjustments Network Settings Internet Settings These items are necessary when you connect to the Internet via a network cable. Enter the respective (alphanumeric) values for your broadband router or Wireless LAN router. The items that need to be set may differ, depending on the Internet service provider or the router. For details, refer to the instruction manuals that have been provided by your Internet service provider or supplied with the router. 1 Select "Internet Settings" in "Network Settings," and press ENTER. 2 Select "IP Address Acquisition," and press ENTER. 3 Select an item, and press ENTER. Use DHCP Use Static IP Address Select this when DHCP (Dynamic Host Configuration Protocol) server settings are available from your Internet service provider. The network settings necessary for the player will be assigned automatically. Set the IP address manually according to your network environment. • When you select "Use DHCP" If you set "DNS Server Auto Acquisition" to "Off," set the following item: - DNS Server (Primary)/DNS Server (Secondary) • When you select "Use Static IP Address" Set the following items: - IP Address - Subnet Mask - Default Gateway - DNS Server (Primary)/DNS Server (Secondary) b When you set the "DNS Server (Primary)"/ "DNS Server (Secondary)" addresses manually, enter the "DNS Server (Primary)" address. Otherwise, the "Internet Settings" will be set incorrectly. 4 If your ISP has a specific proxy server setting, select "Proxy Settings" using M/m, and press ENTER. The "Proxy Settings" display appears. If the proxy server does not have a specific setting, go to step 8. 5 Set "Use of Proxy Server" to "On." 6 Select "Proxy Server" and "Port," and enter the settings. To enter the proxy server, see "To enter characters" (page 52). 7 Press RETURN. 8 Select "Network Diagnostic" using M/ m, and press ENTER. 9 Select "Start," and press ENTER. 10 Check that the message "Network connections are correct." appears. The setup is finished. If the message does not appear, follow the on-screen messages. ,continued 51