Sony BDP-BX59 Operating Instructions - Page 36
Control for HDMI BRAVIA, You cannot start the PARTY - software update
View all Sony BDP-BX59 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
You cannot connect the player to the wireless LAN router. , Check if the wireless LAN router is on. , Depending on the surrounding environment, such as the wall material, radio wave receiving condition, or obstacles between the player and the wireless LAN router, the communication distance may be shortened. Move the player and the wireless LAN router closer to each other. , Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt the communication. Move the player away from such devices, or turn off such devices. The desired wireless router do not appear in the wireless network list. , Press RETURN to return to the previous screen, and try wireless setup again. If the desired wireless router is still not detected, press RETURN to select [Manual registration]. The message [A new software version is available. Please go to the "Setup" section of the menu and select "Network update" to perform the update.] appears on the screen when turning the player on. , See [Network Update] (page 28) to update the player to a newer software version. You cannot start the PARTY STREAMING function. , Check that [PARTY Auto Start] is set to [On] in [Network Settings] (page 33). Control for HDMI (BRAVIA Sync) The [Control for HDMI] function does not work (BRAVIA Sync). , Check that [Control for HDMI] is set to [On] (page 31). , If you change the HDMI connection, turn the player off and on again. , If power failure occurs, set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 31). , Check the following and refer to the instruction manual supplied with the component. - the connected component is compatible with the [Control for HDMI] function. - the connected component's setting for the [Control for HDMI] function is correct. , When you connect the player to a TV through an AV amplifier (receiver), - if the AV amplifier (receiver) is not compatible with the [Control for HDMI] function, you may be unable to control the TV from the player. - if you change the HDMI connection, disconnect and reconnect the AC power cord, or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 31). Refer to the instruction manual supplied with the AV amplifier (receiver). 36