Sony BDP-S190 Operating Instructions - Page 28

The disc tray does not open and you cannot remove the disc even after you press Z. , Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5Hold down [/1 on the player for more than 10 seconds until the player turns off. The player does not respond to any button. , Moisture has condensed inside the player (page 4). , Hold down [/1 on the player for more than 10 seconds until the player turns off. If the player still does not respond to any button, disconnect then reconnect the AC power cord. USB: USB jack Type A, maximum current 500 mA (For connecting USB device) General Power requirements: 110 V - 240 V AC, 50/60 Hz See page 3 for further information. Power consumption: 10 W Dimensions (approx.): 290 mm × 196 mm × 43 mm (11 1/2 in. × 7 3/4 in. × 1 3/4 in.) (width/depth/height) incl. projecting parts Mass (approx.): 1.1 kg (2 lb 6 3/4 oz) Operating temperature: 5 ºC to 35 ºC (41 °F to 95 °F) Operating humidity: 25 % to 80 % Supplied accessories See page 11. Specifications and design are subject to change without notice. Playable discs Specifications System Laser: Semiconductor laser Inputs and outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal 28 Blu-ray Disc*1 DVD*3 CD*3 BD-ROM BD-R*2/BD-RE*2 DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD-DA (Music CD) CD-ROM CD-R/CD-RW *1 Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. The audio output differs depending on the source, connected output jack, and selected audio settings. *2 BD-RE: Ver.2.1 BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type)