Sony BDP-S2200 Reference Guide - Page 2

WARNING, On AC adaptor - blu ray player

Get Sony BDP-S2200 PDF manuals and user guides View all Sony BDP-S2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. This label is located on the laser protective housing inside the enclosure. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Precautions • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. • Install this unit so that the adaptor can be unplugged from the wall socket immediately in the event of trouble. • This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 metres. • The player is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the player itself has been turned off. • To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. • Do not expose the appliance to naked flame sources (for example, lighted candles). • Do not install this player in a confined space, such as a bookshelf or similar unit. • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates. On AC adaptor • Use the supplied AC adaptor for this player, as other adaptors may cause a malfunction. • Do not disassemble or reverse-engineer. • Do not confine the AC adaptor in a closed place such as a bookshelf or an AV cabinet. • Do not connect the AC adaptor to a traveler's electric transformer, which may generate heat and cause a malfunction. • Do not drop or apply shock. • Connect the supplied AC adaptor in the numeric order shown below. When removing them, do so in reverse order. 1 to DC IN 12 V to AC outlet 2 AC adaptor (supplied)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this Blu-ray Disc/DVD player is harmful to
eyes, do not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
This label is located on the laser protective
housing inside the enclosure.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
Precautions
•
To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on the
apparatus.
•
Install this unit so that the adaptor can be
unplugged from the wall socket immediately in
the event of trouble.
•
This equipment has been tested and found to
comply with the limits set out in the EMC
Directive using a connection cable shorter than
3 metres.
•
The player is not disconnected from the AC
power source as long as it is connected to the
wall outlet, even if the player itself has been
turned off.
•
To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
•
Do not expose the appliance to naked flame
sources (for example, lighted candles).
•
Do not install this player in a confined space,
such as a bookshelf or similar unit.
•
If the player is brought directly from a cold to a
warm location, or is placed in a very damp
room, moisture may condense on the lenses
inside the player. Should this occur, the player
may not operate properly. In this case, remove
the disc and leave the player turned on for about
half an hour until the moisture evaporates.
On AC adaptor
•
Use the supplied AC adaptor for this player,
as other adaptors may cause a malfunction.
•
Do not disassemble or reverse-engineer.
•
Do not confine the AC adaptor in a closed
place such as a bookshelf or an AV cabinet.
•
Do not connect the AC adaptor to a
traveler’s electric transformer, which may
generate heat and cause a malfunction.
•
Do not drop or apply shock.
•
Connect the supplied AC adaptor in the
numeric order shown below. When
removing them, do so in reverse order.
to AC outlet
1
to DC IN
12 V
2
AC adaptor (supplied)