Sony BDV-E300 Operating Instructions - Page 30
Press, to select the setting that, matches your TV type., The Setup Display for the [Control
View all Sony BDV-E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Getting Started Note • When you do not connect the unit and TV with an HDMI cable, you cannot select [HDMI]. • When connecting the HDMI OUT jack and other video output jacks at the same time, select [Component Video]. • For details about video output resolution, see "Video Output Resolution" (page 99). 8 Press or c. The Setup Display for video output resolution selection appears. For details, see [Output Video Format] (page 77). When you select [HDMI] in Step 7 Easy Setup - HDMI Resolution Select the resolution to output to the TV. "Auto" is the standard selection. The video switches for 30 seconds when this setting is changed. Check that there are no problems with the video. Nothing is displayed on the screen if the resolution is incorrect. Auto Note • If the picture is distorted or no picture appears, wait for about 30 seconds without pressing any buttons. [Is this resolution OK?] appears. Select [Cancel]. The display returns to the resolution setting screen. • If the selected video output resolution is incorrect, no picture appears on the screen. In this case, press and hold N and Z on the unit for more than 5 seconds to reset the video output resolution to the lowest resolution. To change the video output resolution, set [Output Video Format] in [Video Settings] (page 77). 9 Press or c. The Setup Display for selecting the aspect ratio of the TV to be connected appears. Easy Setup - TV Type Select the screen aspect ratio to match your TV. Select from [Auto], [480i], [480p], [720p], [1080i], or [1080p]. When connecting the HDMI OUT jack and other video output jacks at the same time, video signals may only output from the HDMI OUT jack when [Auto] or [1080p] is selected. When you select [Component Video] in Step 7 Easy Setup - Component Resolution Select the resolution to output to the TV. The video switches for 30 seconds when this setting is changed. Check that there are no problems with the video. Nothing is displayed on the screen if the resolution is incorrect. Select from [480i], [480p], [720p], or [1080i]. When you change the video output resolution A picture is displayed in the selected resolution for about 30 seconds, then the display asks for confirmation. Follow the on-screen instructions and go to the next step. 10 Press X/x to select the setting that matches your TV type. • [16:9]: If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode. (page 76) • [4:3]: If you have a 4:3 standard TV. (page 76) 11 Press or c. When you connect the unit and TV with an HDMI cable The Setup Display for the [Control for HDMI] function appears. Go to Step 12. When you do not connect the unit and TV with an HDMI cable The Setup Display for [BD Internet Connection] appears. Go to Step 14. 30US