Sony BDV-E570 Operating Instructions - Page 73
USB Wireless LAN Adapter UWA-BR100, Subwoofer SS-WSB102 for BDV-E570 - dimensions
UPC - 027242780750
View all Sony BDV-E570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Dimensions (approx.) Mass (approx.) 290 mm × 49 mm × 49 mm (11 1/2 in × 1 15/16 in × 1 15/16 in) (w/h/d) 0.28 kg (10 oz) Subwoofer (SS-WSB101) for BDV-E870/ BDV-E370/BDV-T37 Speaker system Subwoofer Bass reflex Speaker unit 160 mm (6 3/8 in) cone type Rated impedance 3 ohms Dimensions (approx.) 260 mm × 320 mm × 260 mm (10 1/4 in × 12 5/8 in × 10 1/4 in) (w/h/d) Mass (approx.) 5.2 kg (11 lb 8 oz) Subwoofer (SS-WSB102) for BDV-E570/ BDV-E470/BDV-T57 Speaker system Subwoofer Bass reflex Speaker unit 180 mm (7 1/8 in) cone type Rated impedance 3 ohms Dimensions (approx.) 275 mm × 405 mm × 275 mm (10 7/8 in × 16 in × 10 7/8 in) (w/h/d) Mass (approx.) 7.5 kg (16 lb 12 oz) General Power requirements North American and Mexican models: 120 V AC, 60 Hz Latin American models: 110 V - 240 V AC, 50/60 Hz Power consumption On: 170 W Standby: 0.3 W (at the Power Saving mode) Dimensions (approx.) 430 mm × 85 mm × 335 mm (17 in × 3 3/8 in × 13 1/4 in) (w/h/d) incl. projecting parts Mass (approx.) 4.8 kg (10 lb 10 oz) USB Wireless LAN Adapter (UWA-BR100) for BDV-E570/BDV-T57 Standards Compliance: IEEE 802.11a/b/g/n Host Interface: USB 2.0 Security: 64/128 bit: WEP, WPA/ WPA2, WPS Frequency and Channel*: 2.4 GHz - 2.4835 GHz [CH1 - 11] 5.15 GHz - 5.25 GHz [CH36 - 48] 5.25 GHz - 5.35 GHz [CH52 - 64] 5.47 GHz - 5.725 GHz [CH100 - 140] 5.725 GHz - 5.85 GHz [CH149 - 165] Data Rate**: 802.11a/g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps 802.11b: 11, 5.5, 2 and 1 Mbps 802.11n: up to 300 Mbps (40 MHz/spatial streams: 2) Power consumption: Tx: up to 500 mA Mass (Approx.): USB Wireless LAN Adapter: 27 g (1 oz) Dimensions (Approx.) (w × h × d): USB Wireless LAN Adapter: 96 mm × 14 mm × 27 mm (3 7/8 in × 9/16 in × 1 1/8 in) * The frequency and channel differ depending on the area. ** The transmission speed differs depending on the distance and number of obstructions between the transmission products, the configuration of products, the radio wave conditions, the line traffic, and the products that you use. The transmission may also be cut off depending on the radio wave conditions. The standard values of the transmission speed are the theoretical maximum values for the wireless standards. They are not the actual speeds of data transmission. Design and specifications are subject to change without notice. • Standby power consumption 0.3 W. • Halogenated flame retardants are not used in the certain printed wiring boards. • Over 85% power efficiency of amplifier block is achieved with the full digital amplifier, S-Master. Additional Information 73US