Sony BDV-E6100 Operating Instructions 1 - Page 56

Tuner Radio stations cannot be tuned in. t Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial). t The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning. Playback The disc does not play. t The region code on the BD/DVD does not match the system. t Moisture has condensed inside the unit and may cause damage to the lenses. Remove the disc and leave the unit turned on for about half an hour. t The system cannot play a recorded disc that is not correctly finalized (page 58). File names are not displayed correctly. t The system can only display ISO 8859-1 compliant character formats. Other character formats may be displayed differently. t Depending on the writing software used, the input characters may be displayed differently. A disc does not start playing from the beginning. t Resume play has been selected. Press OPTIONS and select [Play from beginning], then press . Playback does not start from the resume point where you last stopped playing. t The resume point may be cleared from memory depending on the disc when • you open the disc tray. • you disconnect the USB device. • you play other content. • you turn off the unit. The language for the soundtrack/ subtitle or angles cannot be changed. t Try using the BD's or DVD's menu. t Multi-lingual tracks/subtitles or multi- angles are not recorded on the BD or DVD being played. Bonus contents or other data that are contained in a BD-ROM cannot be played. t Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and reconnect the USB device (page 26). 4 Turn the system on. 5 Insert the BD-ROM with BONUSVIEW/BD-LIVE. USB device The USB device is not recognized. t Try the following: 1 Turn the system off. 2 Remove and reconnect the USB device. 3 Turn the system on. t Make sure that the USB device is securely connected to the (USB) port. t Check if the USB device or a cable is damaged. t Check if the USB device is on. 56US