Sony BDV-E880 Operating Instructions - Page 20
Step 2: Connecting the System, Connecting the speakers
View all Sony BDV-E880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started Step 2: Connecting the System For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. To assemble the speakers, refer to the supplied "Speaker Installation Guide." (BDV-E880/BDV-E980 only) • When you connect another component with a volume control, turn down the volume of the other components to a level where sound is not distorted. Connecting the speakers To connect speaker cords to the speaker You need to connect a speaker cord to each of the front, center, and surround speakers. The connector of the speaker cords and the color tube are color-coded based on the speaker type. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation (rubber covering) in the speaker terminals. Color tube (+) Rear or bottom of the speaker Connector (-) 20US