Sony BDV-T10 Operating Instructions - Page 79
Attenuate - AUDIO], BD/DVD Audio Output], Sound Effect], Speaker Settings], Auto Calibration], MODE
UPC - 027242763661
View all Sony BDV-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Settings and Adjustments x [Attenuate - AUDIO] Distortion may occur when you listen to a component connected to the AUDIO (AUDIO IN L/R) jacks. You can prevent distortion by reducing the input level on the unit. Distortion is not a malfunction and will depend on the component connected. [On]: Attenuates the input level. The output level is changed. [Off]: Normal input level. x [BD/DVD Audio Output] The system cannot output multi-channel sound from both the HDMI OUT jack and system's speakers simultaneously. You can select the output method. [Speaker only]: Outputs multi-channel sound from the system's speakers only. [Speaker priority]: Outputs multi-channel sound from the system's speakers and 2-channel linear PCM signals from the HDMI OUT jack. [HDMI priority]: Outputs 2-channel stereo sound from the system's speakers, and enables sound output from the HDMI OUT jack. Sound format from the HDMI OUT jack depends on the connected component. Note • When you set [BD/DVD Audio Output] to [HDMI priority], a confirmation message appears on the TV screen. Press C/c to select [OK] to complete the setup. • When you set [BD/DVD Audio Output] to [HDMI priority], the SOUND MODE, DYNAMIC BASS, NIGHT, "TONE," and "DEC. MODE" functions are disabled. • When the System Audio Control function (page 65) is activated, this setting may change automatically. x [Sound Effect] You can set the system's sound effects (SOUND MODE, DYNAMIC BASS, NIGHT, "TONE," and "DEC. MODE") to on/off. [On]: Enables all of the system's sound effects. The upper limit of sampling frequency is set to 48kHz. [Off]: The sound effects are disabled. Select this when you do not want to set the upper limit of sampling frequency. x [Speaker Settings] To obtain the best possible surround sound, set the speakers. For details, see "Setting the Speakers" (page 67). x [Auto Calibration] You can calibrate the appropriate settings automatically. For details, see "Calibrating the Appropriate Settings Automatically" (page 66). 79US