Sony BKM-21D Note On Using - Page 1

BKM-48X/41HD/42HD BKM-20D/21D/22X/24N/25P/26M/27T/28X BVM-D20F1U/D20F1E/D20F1A BVM-D24E1WU/D24E1WE/D24E1WA Note on using the BKM-41HD/42HD When input option slots on the rear of the monitor are already fitted with a BKM-41HD/42HD HD SDI Input Adaptor (option), do not try to install another adaptor or the analog input connectors board in the slot to the Fig. 1 HD SDI Input Adaptor Cover plates right or fit a cover plate (see Fig. 1) over that slot. Doing so may cause the radiation shield (see Fig. 2) of the BKM-41HD/42HD to be damaged or detached. Fig. 2 Radiation shield BKM-41HD/42HD Input adaptor, etc. Input option slots Analog input connectors board When installing adaptors, moving the analog input connectors board, or fitting a cover plate over an unused slot, always fit the BKM41HD/42HD at the last step of the operation. If a BKM-41HD/42HD is already installed, remove it temporarily while carrying out the other operations, then reinstall it last. Note When installing two or more BKM-41HD/42HD and BKM-20D/21D adaptors in any combination, first use the rightmost option slot, then the second rightmost option slot, and so on. (Before carrying out this installation operation, make sure that the slot to the right of the target slot(s) is already fitted with an adaptor.) Sony Corporation © 1999 Printed in Japan 4-076-168-02(1)