Sony BM-840T Operating Instructions - Page 5
Power, Connection, Setting
View all Sony BM-840T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Power Connection Note on the AC power adaptor Use only the .At.: power adaptor supplied. Do not use any other AC power adaptor. Rear loloolou Porarity of the plug ma. to a wall outlet to DC IN 9V AC power adaptor (supplied) Setting Up the Unit Connecting the Foot Control Unit (supplied) Note "01)0" appears in the tape counter tor about 2 seconds after connecting the AC power adaptor, even if the POWER switch is set to STANDBY. It is not a problem. For operation, refer to "Transcription" on page 7. to CONTROL UNIT BM-840 O Foot control unit This unit uses only standard Microcassettes. Non standard cassettes cannot be used because their "L" dimension (see illustration) is different. Standard 0 0 o Only standard Microcassettes have a small indentation on side A. L Approx. 5 mm Non standard o. 0=0 o o L Approx. 2.5 mm Notes on the Microcassette To protect cassettes from accidental erasure When a recording is made, the previous recording is automatically erased. To prevent erasure, break the cassette tabs. To reuse a cassette To record on a cassette with removed tabs, cover each slot with a piece of plastic tape. - Break out and remove the tab. ' ---"" Plastic tape Continued on ❑e.rt page. Setting Up 5