Sony BT10CX Operating Instructions - Page 13

OPERATING THE UNIT Listening to music VOL - button POWER button VOL + button Check the following before operating the unit. - The BLUETOOTH device is turned on. - Pairing of this unit and the BLUETOOTH device is complete. - The BLUETOOTH device supports the transmitting music function (profile: A2DP). 1 Press and hold the POWER button for about 3 seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice and the unit is turned on. Note Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered. 2 Make the BLUETOOTH connection (A2DP) from a BLUETOOTH device to this unit. Refer to the operating instructions supplied with the BLUETOOTH device on how to operate it. 3 Start playback on the BLUETOOTH device. Notes • When you play music by connecting the unit to a BLUETOOTH device using HSP (Headset Profile)*, sound quality will not be high. For better sound, change the BLUETOOTH connection to A2DP (Advanced Audio Distribution Profile)* by operating the BLUETOOTH device. • This unit cannot control music playback functions of the connected device. * For detail on profiles, see page 22. To adjust the volume Press the VOL + or - button while listening to the music. Tips • When the volume level is low, raise the volume of the connected device. The sound will be clearer. • Volume level for listening to music and calling can be set independently. Note You cannot adjust the volume of the BLUETOOTH device by the unit VOL buttons. Continued 13 US