Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 74
Gamut Error Display
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 3 Menu Menu HDMI/DP RGB Gamut Error Display Post-Process Detection Detection Pixel Threshold Signal Level Zebra Pattern Line Modulation 3D Setting Horopter Check Left Right Capture Load Rename Function and operation ([ ]: factory setting) Upper Limit (upper limit) G: 0000 to 4095 [3935] (12bit conversion value) B: 0000 to 4095 [3935] (12bit conversion value) R: 0000 to 4095 [3935] (12bit conversion value) Lower Limit (lower limit) G: 0000 to 4095 [0080] (12bit conversion value) B: 0000 to 4095 [0080] (12bit conversion value) R: 0000 to 4095 [0080] (12bit conversion value) Sets the error detection setting for the signal after YCbCr is converted to RGB. Sets whether or not to detect the error of the input signal ([Off] or On). Sets the pixel number of the gamut error in the frame to notify the gamut error detection. When the pixel number of the error is over the set pixel number, the detection is notified. Set to 00000 to 65535. [00000] Sets the upper and lower lines of the signal level. The signal level to be set is black level 256 and white level 3760 in 12bit conversion value. Upper Limit: 0000 to 4095 [3761] Lower Limit: 0000 to 4095 [0255] Sets the zebra pattern displayed by the gamut error detection. Sets the direction of the pattern. [Diagonal Type1]: Right descending Diagonal Type2: Left descending Sets the amplitude of the pattern display. Set to 1 to 50. [16] Sets the mode of Horopter Check of the 3D signal analyzing function. This item can be selected when the BKM-250TG is installed, and is available for dual-stream HD-SDI signal input. Changes the display mode of the left and right 3D video signals. Selects the display mode of the left signal. [Normal]: Normal picture Black: Displays a black signal (the video signal is not displayed). Mono: Displays the video signal in monochrome mode. Red: Displays only the red component of the video signal. Blue: Displays only the blue component of the video signal. Selects the display mode of the right signal. [Normal]: Normal picture Black: Displays a black signal (the video signal is not displayed). Mono: Displays the video signal in monochrome mode. Red: Displays only the red component of the video signal. Blue: Displays only the blue component of the video signal. Captures the still picture for the standard of the color evaluation (HD Frame Capture). Note Use the controller with software version 1.6 or higher to use the HD Frame Capture function. Loads the captured picture from the "Memory Stick". When the item is selected, you can select the file name to be loaded. Changes a file name of the captured picture in the "Memory Stick". When the item is selected, the file names are displayed. When the file name is selected, you can change the file name (1 to 20 characters). Existing file name: Enter the existing file name. New Name: Enter a new file name. Note The "." must not be used as the first character. 74 Function Setting Menu