Sony CDP-620ESII Operating Instructions - Page 8

DISC PLAYING - CONTINUE mode play For connections, refer to page 18. Label surface L.D ti (II) ( - 1 (II) II ' t-J 25 4 rii -- t co Ell . 6 3 DaJUDrDUoiaUo3Lcc, i=tl- c== -11- 11- 11- 11- c= z TO PLAY 1 Turn on the amplifier and set the input selector to the CD player position. 2 Depress the POWER switch Oa ON). 3 Press the CONTINUE button. 4 Press the !h._ OPEN/CLOSE button. The disc compartment opens. 5 Put the disc in the disc compartment with the label surface up. 6 Press the op- PLAY button. The compartment closes and play begins from the beginning of the disc. When the player reaches the end of the last selection of the disc. it is automatically reset to the beginning of the disc and stands by. TRACK indicator displays 0. To check the total number of selections and total playing time, press the :it OPEN/CLOSE button or the compartment itself when closing the disc compartment. They are displayed for a few seconds. If you press the II PAUSE button when the compartment is open. the compartment will close and the disc will pause at the beginning of the first selection. Notes • The numbers for selections past the 20th will not be displayed in the music calendar display window, but only on the TRACK indicator. • The MINUTE: SECOND display preceded by a minus sign which appears between selections indicates the blank time between selections. Important Since the CD system boasts a wide dynamic range, the peaks of high level inputs are recorded with high fidelity. and the noise level is very low. Do not turn up the volume while listening to a portion with no audio signals or very low level inputs. If you do. the speakers may be damaged when a peak level portion is played. 8