Sony CDP-C725 Operating Instructions - Page 21
Memorizing
View all Sony CDP-C725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Memorizing a DSP Mode The DSP modes, as well as the Equalizer and Reverb settings, can be stored in memory to correspond with a certain disc. By making a DSP file, you can insert or select a disc and have it played to a pre-selected acoustic atmosphere. (See "On Custom Files" on page 22.) To make a DSP file 1 Play the applicable disc and select a DSP mode. Adjust the Equalizer and Reverb controls as necessary. 2 Press the DSP FILE button. "DSP FILE" is displayed and CF DSP appears in the display. LCF DSP will also appear in the display as long as the DSP settings correspond with the DSP file. About Surround Sound There are three basic sound effects that produce the acoustics of concert halls and movie theater. Direct sound, early reflection, and reverberation. The acoustic quality of a room depends on how that room reproduces these three sounds. Types of sounds Early reflection Reverberation .'• Direct sound FLAT also can be memorized. To change DSP files Select a new DSP file. Press the DSP FILE button. The new DSP mode will be stored in the DSP file. To change DSP mode without erasing the DSP file Select the desired DSP mode or adjust the Equalizer/Reverb level control as necessary. Now you have disabled the DSP mode specified in your DSP file and are now adjusting manually. The current mode will stay in effect until you change it again, or press the DISC SKIP button and changes discs. You can recall the DSP file by selecting the bank mode, if the bank is filed. Clearing a DSP file 1 Put the disc whose DSP file is to be cleared in the player. Press DSP FILE. "DSP FILE" appears in the display. 2 Press ERASE while the "DSP FILE" is displayed. "FILE ERASE" is displayed and "CF DSP" goes off in the display window. 21