Sony CDP CE375 Operating Instructions - Page 11
Programming the CD, tracks - player
UPC - 027242586376
View all Sony CDP CE375 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Playing CDs Programming the CD tracks You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 32 "steps" - one "step" may contain a track or a whole disc. 1 Press PLAY MODE repeatedly until "PROGRAM" appears in the display before you start playing. If a program is already stored, the last step of the program appears in the display. When you want to erase the whole program, hold down CLEAR until "ALL CLr" appears in the display (see page 12). 2 Press DISC 1 - 5 to select the disc. "AL" in the display stands for "all" tracks. When you want to program the whole disc as one step, skip Step 3, and go to Step 4. 3 Turn lAMSL until the track you want appears and push lAMSL to select the track. The track number that you programmed, the playing order, and the total playing time appear in the display. If you've made a mistake Press CLEAR, then repeat Step 2. Tip You can select the track using the number buttons on the remote. To select a track with a number over 10, use >10 (see page 9). 4 To program other discs or tracks, do the following: To program Other discs Other tracks on the same disc Other tracks on other discs Repeat Step(s) 2 3 2 and 3 5 Press H to start Program Play. To cancel Program Play Press PLAY MODE. Tips • You can create your program while checking the disc labels. While the disc tray is open, follow Steps 1 to 4 with pressing the DISC SKIP button to check the disc labels. If you close the disc tray before Step 5, the total playing time appears in the display after a while. Note that, if the programmed track number isn't found on the disc, that step is automatically erased. • The program remains even after the Program Play ends. When you press the H button, you can play the same program again. • The program remains until you erase it or turn off the player. If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren't found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. • For the recording to the A side or B side of the cassette tape, you can pause Program Play. Note The total playing time doesn't appear when: - You have programmed a track whose number exceeds 20. - The total playing time of the program exceeds 200 minutes. Checking the track order You can check your program before or after you start playing. Press CHECK. Each time you press this button, the display shows the track (the disc and track numbers) or the disc (the disc number and "AL" indication) of each step in the programmed order. After the last step in the program, the display shows "End" and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps. continued 11