Sony CDX-C5005 Operating Instructions - Page 17
Storing the station names — Station Memo, Station Memo - radio
View all Sony CDX-C5005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Storing the station names - Station Memo You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters for a station. Storing the station names 1 Tune in a station whose name you want to store. 2 Press (MENU), then press either side of (DISC/PRST) repeatedly until "NAME EDIT" appears. 3 Press (ENTER). 4 Enter the characters. 1 Press the (+) side of (DISC/PRST) repeatedly to select the desired characters. (A t B t C t ··· Z t 0 t 1 t 2 t ··· 9 t + t - t * t / t \ t > t < t . t _ ) If you press the (-) side of (DISC/PRST) repeatedly, the characters appear in the reverse order. If you want to put a blank space between characters, select "_" (underbar). 2 Press the (+) side of (SEEK/AMS) after locating the desired character. The next character flashes. Tips • To erase or correct a name, enter "_" (under-bar) for each character. • There is another way to start storing station names. Press (LIST) for two seconds instead of steps 2 and 3. You can also complete the operation by pressing (LIST) for two seconds instead of step 5. Displaying the station name Press (DSPL) during radio reception. Each time you press (DSPL), the item changes as follows: Station name* y Frequency * If the station name of a station is not stored, "NO NAME" appears in the display for one second. Erasing the station name 1 Tune in a station whose name you want to erase. 2 Press (MENU), then press either side of (DISC/PRST) repeatedly until "NAME DEL" appears. 3 Press (ENTER). 4 Press (ENTER) for two seconds. The name is erased. Repeat steps 1 through 4 if you want to erase other names. 5 Press (MENU) twice. The unit returns to the normal radio reception mode. Note When you erase all of the station names, "NO NAME" appears in step 4. If you press the (-) side of (SEEK/AMS), the previous character flashes. 3 Repeat steps 1 and 2 to enter the entire name. 5 To return to the normal radio reception, press (ENTER). 17