Sony CDX-C5050X Operating Instructions (primary manual) - Page 20

Other operations Rotate the VOL control to adjust the volume. Press (ATT) to attenuate the sound. Tip You can also change the operative direction of these controls with the unit (see "Changing the sound and display settings" on page 21). OFF Press (OFF) to turn off the unit. Press (SOUND) to adjust the volume and sound menu. Press (DSPL) to display the memorized names. Tip If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for two seconds to turn off the clock indication after turning off the engine. Changing the operative direction The operative direction of controls is factoryset as shown below. To increase Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. 1 Select the item you want to adjust by pressing (SOUND) repeatedly. Each time you press (SOUND), the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) 2 Adjust the selected item by pressing either side of (SEEK/AMS). When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Note Adjust within three seconds after selecting the item. To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Attenuating the sound Press (ATT) on the rotary commander or card remote commander. "ATT-ON" flashes momentarily. To restore the previous volume level, press (ATT) again. Tip When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). Press (SOUND) for two seconds while pushing the VOL control. 20