Sony CDX-C90 Operating Instructions - Page 36

Tip If the Select mode the in Func. menu is set to "Source," the function menu is automatically appears on the right side of the display, depending on the source you select. (see page 48) Selecting stations with the strongest signals (BTM) DSPL DSPL OPEN BTM MONO LCL 5 6 7 8 9 10 BTM Note EN If the radio can only tune in a few stations or receives only weak frequencies, the BTM function may not assign frequencies to all the preset station numbers. 1 While listening to an FM or AM broadcast, press and hold DSPL for two seconds. 2 Press BTM. The unit selects the station with the strongest signals and memorizes them in the order of their frequencies. A beep sounds after storing the stations and the unit returns to the normal display. Selecting the mode with the wireless remote While listening to an FM or AM, press MENU and set the Preset mode to "BTM." What is the BTM (Best Tuning Memory) function? BTM is a function that selects the radio stations with the strongest signals and automatically sets them to preset station numbers. The BTM function starts tuning in stations from the lowest frequency on the band (FM or AM). When a station is found, the unit assigns the frequency to the currently selected preset station number. When preset numbers are not displayed, the unit assigns frequencies starting with preset station 1. Even after the unit has assigned frequencies to all the preset station numbers, the unit continues tuning. If stronger signals are found, the unit replaces the current preset stations with the stronger frequencies. Finally, the unit sorts the stations in ascending order by frequency. 36 Radio