Sony CDX-CA750X Operating Instructions - Page 20
Setting the Dynamic Soundstage Organizer (DSO), Selecting the spectrum analyzer, Labeling a Motion - parts
View all Sony CDX-CA750X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2 Press either side of (DISC/PRESET) to adjust the desired volume level. The volume level is adjustable by 1 dB steps from -10 dB to +10 dB. To restore the factory-set equalizer curve, press (ENTER) for 2 seconds. 5 Press (MENU) twice. When the effect setting is complete, the normal playback mode appears. Selecting the spectrum analyzer The sound signal level is displayed on a spectrum analyzer. You can select a display for ten patterns (A-1 to A-5 or B-1 to B-5), or the automatic display mode where all the patterns appear. 1 Press (SOURCE) to select a source (radio, CD, MD, or TV). 2 Press (MENU). 3 Press either side of (DISC/PRESET) repeatedly until "SA" appears. Setting the Dynamic Soundstage Organizer (DSO) If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear. The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers in the dashboard (virtual speakers). 1 Press (SOURCE) to select a source (radio, CD, MD, or TV). 2 Press (DSO) repeatedly until "DSO on" appears. To cancel the DSO function, select "DSO off" in step 2. 4 Press either side of (SEEK) repeatedly to select the desired setting. 5 Press (ENTER). Labeling a Motion Display You can label a Motion Display with up to 64 characters to appear when the unit is turned off. Labels will scroll in the display in the M.Dspl 1 mode (the display remains lit even when the power is off). 1 Press (OFF). CD/MD playback or radio reception stops (the key illumination and display remain on). 2 Press (MENU), then press either side of (DISC/PRESET) repeatedly until "Name Input" appears. 3 Press (ENTER). 20