Sony CDX-CA810X Operating Instructions - Page 19
Setting the equalizer EQ7 - xplod
View all Sony CDX-CA810X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting the equalizer (EQ7) You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM, and OFF (equalizer OFF)). You can store a different equalizer setting for each source. Selecting the equalizer curve 1 Press (SOURCE) to select a source (radio, CD, or MD). 2 Press (EQ7) repeatedly until the desired equalizer curve. Each time you press (EQ7), the item changes. 2 Press (DISC) (+) or (DISC) (-) to adjust the desired volume level. The volume level is adjustable by 1 dB steps from -10 dB to +10 dB. To restore the factory-set equalizer curve, press (ENTER) for 2 seconds. 5 Press (MENU) twice. When the effect setting is complete, the display returns to normal play mode. To cancel the equalizing effect, select "OFF." After 3 seconds, the display returns to normal play mode. Adjusting the equalizer curve You can store and adjust the equalizer settings for frequency and volume level. (With the card remote commander) 1 Press (MENU). 2 Press (DISC) (+) or (DISC) (-) repeatedly until "EQ7 TUNE" appears, then press (ENTER). 3 Press (SEEK) (+) or (SEEK) (-) to select the desired equalizer curve, then press (ENTER). Each time you press (SEEK) (+) or (SEEK) (-), the item changes. 4 Select the desired frequency and level. 1 Press (SEEK) (+) or (SEEK) (-) to select the desired frequency. Each time you press (SEEK) (+) or (SEEK) (-), the frequency changes. 62 Hz y 157 Hz y 396 Hz y 1 kHz y 2.5 kHz y 6.3 kHz y 16 kHz 19