Sony CDX-CA810X Product Guide / Specifications - Page 1

2003 SONY MOBILE PRODUCT GUIDE CDX-CA810X FM/AM Compact Disc Player • 7-color, 13-segment LED Display • Active Servo Control • F/R Preouts w/HPF • Sub Preout w/LPF • Flip-down Detachable Face • 52W x 4 High Power • 8fs, 1-Bit D/A Converter • 18FM + 12AM memory presets • CD Text (disc/track/title display) • XT-XM1 Control • DSO, EQ7 • XM Ready, CD Text • 60 Degree Install • CD-R/RW Playback • SSIR-EXA Tuner • CD/MD Control w/Custom File™ memory • Station Memo™, Disc Memo™, Memo List functions • Supplied Wireless Card Remote (RM-X118) • Optional Wired Rotary Remote (RM-X4S) • Indicates step-up Audio Power Specifications POWER OUTPUT AND TOTAL HARMONIC DISTORTION 23.2 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion. CD Player Section Signal-to-noise ratio Frequency response Wow and flutter 90 dB 10 - 20,000 Hz Below measurable limit Tuner FM Tuning range Antenna terminal Intermediate frequency Usable sensitivity Selectivity Signal-to-noise ratio Harmonic distortion at 1 kHz Separation Frequency response 87.5 - 107.9 MHz External antenna connector 10.7 MHz/450 kHz 9 dBf 75 dB at 400 kHz 67 dB (stereo), 69 dB (mono) 0.5% (stereo), 0.3% (mono) 35 dB at 1 kHz 30 - 15,000 Hz AM Tuning range Antenna terminal Intermediate frequency Sensitivity 530 - 1,710 kHz External antenna connector 10.7 MHz/450 kHz 30 µV Power Amplifier Section Outputs Speaker impedance Maximum power output Speaker outputs (sure seal connectors) 4 - 8 ohms 52 W × 4 (at 4 ohms) General Outputs Inputs Tone controls Loudness Power requirements Dimensions Mounting dimensions Mass Supplied accessories Audio outputs (front/rear) Subwoofer output (mono) Power antenna relay control terminal Power amplifier control terminal Telephone ATT control terminal BUS control input terminal BUS audio input terminal Remote controller input terminal Antenna input terminal Bass ±10 dB at 62 Hz Treble ±10 dB at 16 kHz +8 dB at 100 Hz +2 dB at 10 kHz 12 V DC car battery (negative ground) Approx. 178 × 50 × 180 mm (7 1/8 × 2 × 7 1/8 in.) (w/h/d) Approx. 182 × 53 × 161 mm (7 1/4 × 2 1/8 × 6 3/8 in.) (w/h/d) Approx. 1.2 kg (2 lb. 10 oz.) Card remote commander RM-X118 Parts for installation and connections (1 set) Front panel case (1) Harness Plug Configuration 12345678 9 10 11 12 13 14 15 16 Plug shown with wires facing viewer. Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Wire Color White Green Purple Gray Blue/white Blue Red Black White/black Green/black Purple/black Gray/black Sky blue Yellow Description Left front + Left rear + Right rear + Right front + AMP Remote ANT Remote Accessory Ground Left front Left rear Right rear Right front ATT Battery Note This unit cannot be connected to a UniLink digital preamplifier or equalizer. Design and Specifications subject to change without notice.