Sony CDX-GT240 Operating Instructions - Page 8
Storing and receiving stations - time manual
UPC - 027242774049
View all Sony CDX-GT240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically - BTM 1 Press (SOURCE/OFF) repeatedly until "TUNER" appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press and hold the select button. The setup display appears. 3 Press the select button repeatedly until "BTM" appears. 4 Press (SEEK) +. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored. Storing manually 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEM" or "MEMORY" appears. Note If you try to store another station on the same number button, the previously stored station will be replaced. Receiving the stored stations 1 Select the band, then press a number button ((1) to (6)). Tuning automatically 1 Select the band, then press (SEEK) +/- to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) +/- to locate the approximate frequency, then press (SEEK) +/- repeatedly to fine adjust to the desired frequency (manual tuning). RDS Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items Example: CDX-GT340 Program service name, Clock, Frequency*, Preset number * While receiving the RDS station, " *" is displayed on the left of the frequency indication. To change display items, press (DSPL/SCRL). RDS services This unit automatically provides RDS services as follows: PTY (Program Types) Displays the currently received program type. Also searches your selected program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. Notes • Depending on the country/region, not all RDS functions may be available. • RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data. Selecting PTY 1 Press (PTY) during FM reception. Example: CDX-GT340 The current program type name appears if the station is transmitting PTY data. 2 Press (PTY) repeatedly until the desired program type appears. 3 Press (SEEK) +/-. The unit starts to search for a station broadcasting the selected program type. 8