Sony CDX-GT56UIW Operating Instructions - Page 18
Caut Alm, Aux-a, Auto Off, Rear/sub, Dimmer, M.display, Auto Scr, Zap Time, Zap Beep, Lpf Freq, Lpf
View all Sony CDX-GT56UIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CAUT ALM*1 (Caution Alarm) Activates the caution alarm: "ON," "OFF" (page 4). AUX-A*1 (AUX Audio) Activates the AUX source display: "ON," "OFF" (page 19). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (Seconds)," "30M (Minutes)," "60M (Minutes)." REAR/SUB*1 Switches the audio output: "SUB-OUT" (subwoofer), "REAR-OUT" (power amplifier). DEMO (Demonstration) Activates the demonstration: "ON," "OFF." DIMMER Changes the display brightness: "ON," "OFF." M.DISPLAY (Motion Display) - "SA": to show moving patterns and spectrum analyzer. - "OFF": to deactivate the Motion Display. AUTO SCR (Auto Scroll) Scrolls long items automatically: "ON," "OFF." ZAP TIME (Zappin Time) Selects the playback time for the ZAPPIN function. - "Z.TIME-1 (about 6 seconds)," "Z.TIME-2 (about 15 seconds)," "Z.TIME-3 (about 30 seconds)." ZAP BEEP (Zappin Beep) Has the beep sound between track passages: "ON," "OFF." LPF FREQ*2 (Low Pass Filter Frequency) Selects the subwoofer cut-off frequency: "50Hz," "60Hz," "80Hz," "100Hz," "120Hz." 18 LPF SLOP*2 (Low Pass Filter Slope) Selects the LPF slope: "1," "2," "3." SW PHASE*3 (Subwoofer Phase) Selects the subwoofer phase: "NORM," "REV." HPF FREQ (High Pass Filter Frequency) Selects the front/rear speaker cut-off frequency: "OFF," "50Hz," "60Hz," "80Hz," "100Hz," "120Hz." HPF SLOP (High Pass Filter Slope) Selects the HPF slope (effective only when HPF FREQ is set to other than "OFF"): "1," "2," "3." LOUDNESS (Dynamic Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON," "OFF." ALO (Automatic Level Optimizer) Adjust the playback volume level of all playback sources to the optimum level: "ON," "OFF." BTM (page 8) *1 When the unit is turned off. *2 When the audio output is set to "SUB-OUT" or Rear Bass Enhancer is set to other than "OFF." *3 When the audio output is set to "SUB-OUT."